JVC HR-S9500U manual Select S-VHS ET SET Mode, Engage S-VHS ET Mode, Super VHS ET

42EN

PLAYBACKANDRECORDINGFEATURES(cont.)

S-VHS ET

NOTES:

●You cannot activate the S-VHS ET function...

...while recording is in progress.

...while timer-recording (incl. Instant Timer Recording ☞ pg.

45)is in progress.

...while Video Calibration (☞ pg. 36) is in progress.

...when the VCR's power is off.

● S-VHS ET does not work with S-VHS tapes.

Super VHS ET

Your VCR is equipped with Super VHS ET that makes it possible to record with S-VHS picture quality on VHS cassettes.

SELECT S-VHS ET SET

MODE

Press S-VHS ET. The
current setting appears on
1 the screen for about 5
seconds.	S-VHS ET : OFF

ENGAGE S-VHS ET MODE

2 While the current setting is displayed on the screen, press S-VHS ET again to set to "ON".

●The "S-VHS" indicator lights on the front display panel.

S-VHS ET

This facility allows recording with S-VHS picture quality on VHS cassettes. You can play back those cassettes recorded in S-VHS ET on a VCR equipped with S-VHS ET.

NOTES:

●To obtain the highest quality recording and playback pictures over a longer period on this model, S-VHS recording on S-VHS tape is recommended.

●You can play back S-VHS ET recordings not only on this VCR but also on another VHS VCR equipped with S-VHS ET.

*It is recommended to specifically label S-VHS ET recordings so you can easily distinguish them from regular VHS recordings.

●S-VHS ET recordings can also be played back on an S-VHS VCR or a VHS VCR equipped with SQPB (S-VHS QUASI PLAY- BACK) function. However, there may be cases where S-VHS ET playback is not possible on a particular VCR.

●Frequent still, frame-by-frame and slow-motion playback may damage the tape and cause picture degradation.

●With some tapes, better picture quality may not be obtained even with S-VHS ET recording. It is recommended that you do test record beforehand to make sure whether better results can be obtained.

●High Grade tapes are recommended for superior results.

●Make sure that "VIDEO CALIBRATION" is set to "ON" at the Function screen (☞ pg. 36).

●During S-VHS ET playback, noise may appear depending on tape quality.

●Noise may appear during still, frame-by-frame, slow-motion playback and TimeScan search.

●If the playback picture becomes blurred or interrupted, use a cleaning cassette.