Audio Settings, Other Settings | JVC HR-XVC32SUJ manual

Audio Settings

DIGITAL AUDIO	Set to the appropriate mode according to the type of the device connected to DIGITAL AUDIO
OUTPUT	OUT connector on the rear of unit.
PCM ONLY	Set this item correctly according to the logo on the device.
	It is not necessary to set this mode when you connect no device to DIGITAL AUDIO OUT
DOLBY DIGITAL/PCM	connector.
STREAM/PCM	PCM ONLY:	Select this when connecting to a device bearing neither Dolby Digital nor
		DTS logo, or a digital recorder.
	DOLBY DIGITAL/PCM: Suitable for playing back a film or progressive source disc.
	STREAM/PCM:	Select this when connecting an amplifier or a decoder bearing both Dolby
		Digital and DTS logos.

DOWN MIX	Set to the appropriate mode according to your audio system when you play back a DVD VIDEO
DOLBY SURROUND	disc recorded with surround multichannel audio. This setting affects only the analog audio
	output signal from the AUDIO OUTPUT connectors (DVD) when playing back a DVD VIDEO
STEREO	disc recorded with surround multichannel audio.
	DOLBY SURROUND: Select this when you enjoy multichannel surround audio by connecting the
		unit’s analog AUDIO OUTPUT connector (DVD) to a surround decoder.
	STEREO:	Select this when you enjoy conventional 2-channel stereo audio by
		connecting the unit’s analog AUDIO OUTPUT connectors (DVD) to a stereo
		amplifier/receiver or TV, or when you dub audio of a DVD VIDEO disc
		recorded with surround audio to your MD, cassette, etc.

D. RANGE	You can compress the dynamic range (the difference between the loudest and quietest audio
COMPRESSION	signals) of the sound when listening to the sound at a low volume or at night.
AUTO	This function is available with DVD VIDEO discs recorded with the Dolby Digital format. Set to
	the appropriate mode according to the number of channels recorded.
ON	AUTO: Audio is played back with channels other than Dolby Digital channel 1 or 2 compressed.

	ON: Audio is played back with all channel compressed.

Other Settings

RESUME	When this function is set to “ON,” you can use the resume function. (☞ pg. 24)
ON	ON: The unit resumes playback from the position where playback has been stopped.
ON	OFF: This function is deactivated.
OFF	NOTE:
	NOTE:
	This function is not available for Audio CDs and MP3 discs.

ON SCREEN GUIDE	When this function is set to “ON,” the unit can display “on-screen guide” icons or characters
ON	which shows the conditions of the unit or disc.
ON
OFF

Introduction

Preparation

Operations on VCR Deck

Operations on DVD Deck

Advanced Operations

Additional Information

35

Image 35

JVC HR-XVC32SUJ manual Audio Settings, Other Settings

Contents

Advanced Operations Additional Information Introduction Preparation Unit’s region code is printed on the rear of the unit AllAll inin ThisThis ComboCo bo Unitnit Safety First Dear Customer Power System On placing the unit Video heads cleaningDo not block the unit’s ventilation openings or holes To mobile phone users DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM Photo CD, Sacd Full-Size VHSCompact VHS Supported Digital audio formats OPEN/CLOSE Buttons, Connectors, and IndicatorsPower Rear View On Screen How to use the Remote ⁄ Set the VCR channel ConnectionsBasic Connections Connect the unit to TV ⁄ Set the VCR channel to off Plug the end of the AC power cord into an AC outletPress Power on the unit to turn off the unit, then Component Video Connection Plug&Play Set Initial SettingsScan Mode Set DVD deck only On-screen Language Set VCR deck Initial Settings Monitor Set DVD deckLanguage Set Language On-screen Language Set DVD deckMenu/Audio/Subtitle Language Set DVD deck only Semiauto Clock Set Initial Settings Clock SetPreparations Manual Clock Set Manual Channel Set Tuner SetAuto Channel Set During playback Playback on VCR DeckBasic Playback On-Screen Display VCR deck Instant ReView Playback on VCR Deck Playback FeaturesSkip Search Index Search Selecting Soundtrack Adjusting Tracking ConditionRepeat Playback One Touch Replay Basic Recording Recording FeaturesRecording Express Timer Programming Timer Recording When programs overlap each other Timer RecordingCheck, cancel and change programs To cancel or change a program Set the tape speed Engage the Satellite Auto Recording modeSatellite Auto Recording ~ Load a disc Using the disc menuPlayback on DVD Deck Zooming the picture Changing the picture tone VFP To adjust the picture toneChanging the language, sound Scene angle Changing the Sound Field To Bring Up the Menu Bar Basic Operation ProcedureWhen a disc is inserted, press on Screen twice Playback on DVD Deck Menu Bar Functions Zooming a still picture MP3/JPEG Files PlaybackControl Display Group/File Selection Editing with another video recorder or a EditingCamcorder @ End dubbing Dubbing from DVD to VCRPrepare the DVD deck for dubbing ⁄ Start dubbing Digital Audio OUT System Connections Tray Lock Remote A/B/C/D Code SwitchingOther Functions Child Lock Access the Main Menu Screen, then select Function Set Subsidiary SettingsMode Set VCR deck ~ Select the VCR deck Select the mode Audio Monitor Auto Power OFFVideo Stabilizer Blue Back Access the DVD Set Up Subsidiary Settings Mode Set DVD deckPicture Settings ~ Select the DVD deck Select the mode Other Settings Audio Settings Playback TroubleshootingPower Symptom Possible Cause Corrective Action Playback Questions & Answers VIDEO/AUDIO DVD deck Language Code ListSpecifications VIDEO/AUDIO VCR deck List of Terms Mode Set VCR deck HR-XVC32SUJ