Component Video Connection

(For high-quality DVD pictures)

Antenna or Cable

Coaxial cable

Flat feeder

Matching transformer (not supplied)

ATTENTION

Be sure to connect the unit’s VIDEO OUTPUT (DVD/ VCR) connector to the TV’s VIDEO input connector.

~Place the unit on a stable, horizontal surface.

ŸConnect the unit to TV.

1Connect the antenna, unit and TV as per “AV

Connection.” (pg. 9)

2Connect the unit’s COMPONENT VIDEO OUTPUT connector to the TV’s component video input connector.

!Plug the end of the AC power cord into an AC outlet.

AC Outlet

AC Power Cord

AUDIO OUTPUT

VIDEO OUTPUT

This unit performs Plug&Play Set automatically. (pg. 11)

The clock and tuner channels will automatically be set when the antenna is connected and when the AC power cord is connected to an AC outlet for the first time. (If

AUDIO OUTPUT

COMPONENT VIDEO OUT

VHF/UHF

IN

Back of unit

VHF/UHF

 

OUT

“Auto” and the channel indicator are displayed on the front display panel before the unit is powered on, the clock and tuner channels are being set automatically. Wait for the time to be displayed on the front display panel before turning on the unit.)

Set the VCR channel to off.

Before performing the following steps:

Make sure there is no cassette inserted in the unit.

Make sure the unit is turned on, then press VCR/DVD on the unit so that the VHS indicator lights up on the front display panel.

Component

Audio/video cable (not supplied)

1 Press POWER on the unit to turn off the unit, then

press 7 STOP on the unit for more than 5 seconds.

Video cable

Audio cable (not supplied)

“3 CH” appears on the front display panel.

(not supplied)

To Component

 

Video/audio Input

To Audio/video

connector

input connectors

 

RF cable

 

(supplied)

TV

To 75 ohm Terminal

 

2Press CH +/– on the unit to select “3 CH,” “4 CH,” or “– CH” (off), then press POWER on the unit.

NOTES:

By using the component video connection, you can view the images in the progressive mode. For switching to the progressive mode, refer to “Scan Mode Set (DVD deck only).” (pg. 11)

To enjoy playback of DVD with the component video connection, set the TV’s input to the component video input.

10

Page 10
Image 10
JVC HR-XVC32SUJ manual Component Video Connection, ⁄ Set the VCR channel to off, CH appears on the front display panel