Playback on VCR Deck
Basic Playback
•Turn on the TV and select the VCR channel (or AV mode).
•Slide the TV/VCR/DVD switch on the Remote to the right.
~Load a cassette.
Make sure the window side is up, the rear label side is facing you and the
arrow on the front of the cassette is pointing towards the recorder.
•Do not apply too much pressure when inserting.
•The unit turns on, and the counter is reset automatically.
•If the cassette’s record safety tab has been removed, playback begins automatically.
ŸSelect the VCR deck.
Press VCR on the Remote so that the VHS indicator lights up on the front display panel.
!Start playback.
Press 3 PLAY.
During playback
Stop playback
Press 7 STOP on the Remote.
Pause playback and view still picture
Press 8 PAUSE.
•Press 3 PLAY to resume normal playback.
•If there is vertical jitter, press CH + or – to correct the picture.
Pause and Frame-by-Frame playback
Press 8 PAUSE to pause, then press 8 PAUSE repeatedly.
• Press 3 PLAY to resume normal playback.
Variable Speed Search (including slow-motion)
Press 1 REW or FF ¡ repeatedly.
•Press 3 PLAY to resume normal playback.
•Each time you press 1 REW or FF ¡, the playback speed changes. To decrease the speed during picture search, press the opposite direction button repeatedly.
| Reverse |
|
| Forward | |
|
|
|
|
|
|
Reverse search | Slow | Normal | Forward search | ||
3 steps | motion | play | 2 steps | ||
|
|
|
|
|
|
•During still picture, holding 8 PAUSE for more than 2 seconds starts forward slow motion playback.
If you press 8 PAUSE again, still picture resumes.
•During slow motion playback, some noise may appear on the TV screen. Press CH + or – to eliminate the noise.
When the tape is not running
Press 1 REW or FF ¡.
Eject the cassette
Press 0 EJECT on the unit.
•You can also eject the cassette when the recorder is turned off.
Turn off the unit
Press POWER.
NOTE:
In the search, still,
•the picture will be distorted
•the noise bars will appear
•there will be a loss of color with an
16
