JVC KA-DV5000 manual Confirming correct attachment, Installing Streamproducer, E-10, E-11

Confirming correct attachment

Check to see whether the main unit has been mounted correctly using the procedure shown below.

1Turn off the power of GY-DV5000 and KA- DV5000.

2Press the button on the side of the main unit, open the cover and insert a card in the card slot.

3Close the cover and turn on the KA- DV5000 power.

4Turn on the GY-DV5000 power.

5Check the card status. Check to see that the card status according to the card type is displayed on the LCD monitor and viewfinder screen of GY-DV5000.

Memo During initialization

after the power is turned on, the card status display shown on the left is dis- played.

Caution

Be sure to turn off the GY-DV5000 power before removing card.

: Card not inserted

Installing Streamproducer
1.	Insert the CD-ROM with Streamproducer into the CD-ROM drive.
	Wait until the access lamp of the CD-ROM	English
	drive goes out.
	The screen shown on the left appears.

2. Click on “English”.

The screen shown on the left appears.

Removing/attaching the cover Removing the cover 1 Open the cover.

2Remove by pressing in as shown on the right

so that	the	cover
widens on sides.
Attaching the cover
Perform	the	steps
above in reverse.

			e	: LAN card
		C F		: Compact Flash card
	Memo
Depending on the card shape, the cover
may get in the way or may not close
correctly. In this case, the cover can be
removed by twisting the cover backward
while it is open.

3.	Click on “Install Streamproducer”.
	The Installer starts up.
	Detailed information on how to operate the Streamproducer is described in the “Read
	User’s Guide”, so please refer to this.
	The “Read User’s Guide” can be invoked by selecting:
	Start menu/Programs/Streamproducer/User’s Guide.

E-10 E-11