
3.1.12Removing the rear bracket (See Fig.18)
•Remove the panel assembly, side heat sink, top chassis as- sembly, loading unit assembly, arm bracket assemblies (L)/(R) and main board.
(1)From the back side of the main board, remove the two screws Q attaching the rear heat sink.
(2)Remove the three screws R, screw R' and screw S attach- ing the rear bracket.
Reference:
When attaching the screw R', attach the wire holder with it as before.
(3)Remove the joints f of the rear bracket in the direction of the arrow.
(4)Remove the car cable in the direction of the arrow from the rear bracket.
3.1.13Removing the panel switch board (See Fig.19)
•Remove the panel assembly, side heat sink, top chassis as- sembly, loading unit assembly, arm bracket assemblies (L)/(R) and main board.
(1)From the inside of the bottom chassis assembly, take out the insulator.
(2)Remove the two screws T attaching the panel switch board.
(3)Take out the panel switch board from the bottom chassis assembly.
Wire holder Car cable
R | Rear heat sink | R | |
| |||
R' |
|
|
|
|
|
| f |
Rear bracket | Q | S |
|
|
|
Fig.18
Panel switch board
Insulator
T
Bottom chassis assembly
Fig.19