JVC KD-DV7401, KD-DV7402 2Select “Memory.”, 3Select a PTY code, TA Standby Reception, 7Exit from the setting, 4Select one of the PTY codes, 5Store the selected PTY code

ENGLISH

3Select a PTY code.

You can select a PTY code from the 29 preset PTY codes or from the six stored PTY codes.

•To store your favorite programme types, see the following.

4Start searching for your favorite programme.

If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in.

Storing your favorite programme types

You can store six favorite programme types.

•Whenappears on the display, you can move back to the previous display by pressing number button 3.

1

2Select “Memory.”

4Select one of the PTY codes.5Store the selected PTY code.

Ex.: When “Classics” is selected in step 4

6Repeat steps 3 to 5 to store other PTY codes into other preset numbers.

7Exit from the setting. Activating TA/PTY Standby ReceptionTA Standby Reception

3Select a preset number (“Preset1”– “Preset6”) you want to store into.

either lights up or flashes on the display.

•If lights up, the unit temporarily will switch to Traffic Announcement (TA), if available, from any source other than AM.

The volume changes to the preset TA volume level if the current level is lower than the preset level (see page 47).

•If flashes, TA Standby reception is not yet activated. Tune in to another station providing the RDS signals.

To deactivate TA Standby Reception, press TP

again. goes off.

14