JVC KD-DV7401, KD-DV7402 mode, USER, ROCK, POPS, JAZZ, Sound, HIP HOP, Loudness, 2Select a sound mode, DVolAdjust, [–5to +5], Exit from the setting, 4Exit from the setting

ENGLISH

*If “Off” is selected in step 2, you can only adjust the subwoofer phase.

CHi Pass (Hi Pass Filter)

Turn the control dial to select the cutoff frequency to the front/rear speakers. Set this to match the LPF setting.

• Off:	All signals are sent to the front/rear
	speakers.

•62Hz: Frequencies lower than 62 Hz are cut off.

•95Hz: Frequencies lower than 95 Hz are cut off.

•135Hz: Frequencies lower than 135 Hz are

cut off.

DVolAdjust, [–5 to +5]

Turn the control dial to adjust the input level of each source (except FM).

Adjust to match the input level of the FM sound level.

•Before making an adjustment, select the source you want to adjust.

ELoudness, [Off or On]

Turn the control dial to select “Off” or “On.” When “On” is selected, low and high frequencies sound are boosted to produce a well-balanced sound at low volume level.

4Exit from the setting.

Storing your own sound modes

You can adjust the sound modes and store your own adjustments in memory.

•When is shown on the display, you can move back to the previous screen by pressing number button 6.

1

2Select a sound mode.

3Select a frequency range to adjust.4Adjust the sound elements of the selected frequency range.

1 Press 4/¢ to select the frequency band, then press 5/ ∞to enhanced level for the selected frequency

band. [–6 to +6]

2Press number button 5 (), then turn the control dial to select the frequency.

3Press number button 5 (), then turn the control dial to select the quality slope (Q).

5Repeat steps 3 and 4 to adjust the other frequency bands.

6Store the adjustments.

Preset value setting for each sound mode

		Preset value
Sound	Band1 (100Hz)	Band2 (320Hz)	Band3 (1kHz)	Band4 (3.2kHz)	Band5 (10kHz)
mode
USER	0	0	0	0	0
ROCK	+3	+2	0	+1	+1
CLASSIC	+2	+2	0	+1	0
POPS	0	+1	0	+1	+2
HIP HOP	+4	+1	–2	0	+1
JAZZ	+3	+2	+1	+2	+2

44