ENGLISH

More about this unit

Basic operationsTurning on the power

By pressing SOURCE on the unit, you can also turn on the power. If the source is ready, playback also starts.

Turning off the power

If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power.

General

If you change the source while listening to a disc, playback stops.

Next time you select “DISC” as the playback source, playback will start from where it had been stopped previously.

After ejecting a disc or removing a USB device, “No Disc” or “No USB” appears and you cannot operate some of the buttons. Insert another disc, reattach a USB device, or press SOURCE to select another playback source.

Tuner operationsStoring stations in memory

During SSM search...

All previously stored stations are erased and the stations are stored anew.

Received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency).

When SSM is over, the station stored in No. 1 will be automatically tuned in.

When storing a station manually, the previously preset station is erased when a new station is stored in the same preset number.

FM RDS operations

Network-Tracking Reception requires two types of RDS signals—PI (Programme Identification) and AF (Alternative Frequency) to work correctly. Without receiving these data correctly, Network-Tracking Reception will not operate correctly.

If a Traffic Announcement is received by TA Standby Reception, the volume level automatically changes to the preset level (TA Vol) if the current level is lower than the preset level.

When Alternative Frequency Reception is activated (with AF selected), Network-Tracking Reception is also activated automatically. On the other hand, Network-Tracking Reception cannot be deactivated without deactivating Alternative Frequency Reception. (See pages 15 and 36.)

TA Standby Reception and PTY Standby Reception will be temporarily canceled while listening to an AM station.

If you want to know more about RDS, visit <http://www.rds.org.uk>.

Disc operations

General

In this manual, words “track” and “file” are interchangeably used.

This unit can only play back audio CD (CD-DA) files if different type of files are recorded in the same disc.

Inserting a disc

When a disc is inserted upside down, “Please Eject” appears on the display. Press OPEN, then 0to eject the disc.

Ejecting a disc

If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. Playback starts automatically.

54