Selecting a preset sound mode

You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer).

1

Enter the setting menu.

 

2

Select “EQ.”

 

3

Select “On.”

 

 

• If “Bypass” is selected, you can listen to the original

 

sound mode recorded.

lights up on the

 

display.

 

4

Select a preset sound mode.

ENGLISH

Adjusting the sound

You can adjust the sound characteristics to your preference.

•Whenis shown on the display, you can move back to the previous screen by pressing number button 3 or 6.

1

2

•For “EQ” setting, see above.

3Adjust the selected setting item.A Fad/Bal (Fader/Balance)

1 Press number button 1 ()

to move to the “Fad/Bal” adjustment display.

2Adjust the speaker output balance by pressing:

5/ ∞: between the front and rear speakers. [F6 to R6]

4/¢: between the left and right speakers. [L6 to R6]

BSubwoofer

1 Press number button 1 () to

move to the “Subwoofer” adjustment display.

2Use 4/¢ to select a cutoff frequency to the subwoofer.

•Off*: All signals are sent to the subwoofer.

•55Hz: Frequencies higher than 55 Hz are cut off.

•85Hz: Frequencies higher than 85 Hz are cut off.

•120Hz: Frequencies higher than 120 Hz

are cut off.

3Turn the control dial to adjust the subwoofer output level. [0 to 8]

4Press number button 1 () to move to another setting level.

4/¢: select the quality of LPF. [–12dB/oct or –24dB/oct]

Control dial: Turn the control dial to select the subwoofer phase. [0deg (normal) or 180deg (reverse)]

Continued on the next page

SETTINGS 43