ENGLISH

Listening to the DAB tuner

Before operating, connect the JVC DAB tuner, KT-DB1000 (separately purchased) to the CD changer jack on the rear of the unit.

Preparation: Make sure “Changer” is selected for the external input setting, see page 47.

1

Select “DAB.”

2

Select the bands.

3

Searching for an ensemble.

Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly.

4

Select a service (either primary or secondary) to listen to.

When surrounding sounds are noisy

Some services provide Dynamic Range Control (DRC) signals together with their regular programme signals. DRC will reinforce the low level sounds to improve your listening.

1

2Select one of the DRC signals levels (1, 2, or 3).

•As the number increases, the effect becomes stronger.

3Exit from the setting.

appears on the display.

• will be highlighted only when receiving DRC signals from the tuned service.

Storing DAB services in memory

You can preset six DAB services (primary) for each band.

•Whenappears on the display, you can move back to the previous display by pressing number button 3.

Ex.: Storing an ensemble (primary service) into the preset number 4 of the DAB 1 band.

Using the number buttons

1

34