JVC KD-DV7401, KD-DV7402 Enter setting menu, Connecting a device, •For special device, 3Enter setting menu, 3• For available devices, 6Use the Bluetooth device to search and connect

2Select a number or blank space.

3Repeat steps 1and 2until you finish entering a PIN code.

4Confirm the entry.

“Open...” flashes on the display.

6Use the Bluetooth device to search and connect.

On the device to be connected, enter the same PIN code you have just entered for this unit. “Connected (and device name)” appears on the display.

Now connection is established and you can use the device through the unit.

The device remains registered even after you disconnect the device. Use “Connect“ (or activate “Auto Connect”) to connect the same device from next time on. (See the following and page 52.)

Connecting a device

Perform steps 1 – 3 on page 28, then...

1• Select “Search” to search for available devices.

The unit searches and displays the list of the available devices.

If no available device is detected, “Device not found” appears.

•Select “Special” to connect a special device. The unit displays the list of the preset devices.

2Select a device you want to connect.

3• For available devices...

1 Enter the specific PIN code of the device to the unit.

Refer to the instructions supplied with the

device to check the PIN code.

2Use the Bluetooth device to connect.

Now connection is established and you can use the device through the unit.

•For special device...

Use “Open” or “Search” to connect.

Connecting/disconnecting/deleting a registered device

1Select “BT-PHONE” or “BT-AUDIO.”

2Select a registered device you want to connect/disconnect/delete.

3Enter setting menu.

4• Select “Connect” or “Disconnect” to connect/disconnect the selected device.

ENGLISH

Continued on the next page

EXTERNAL DEVICES 29