JVC KD-DV7401, KD-DV7402 Disc setup menu, •About Dual Zone:, General settings—PSM, Available characters, On-screenguide icons, •Through DIGITAL OUT (optical):

General settings—PSM

ENGLISH	• “Auto” setting for “Dimmer” may not work correctly
	on some vehicles, particularly on those having a
	control dial for dimming.
	In this case, change the “Dimmer” setting to any
	other than “Auto.”
	• If “LCD Type” is set to “Auto,” the display pattern
	will change to the “Positive” or “Negative” pattern
	depending on the “Dimmer” setting.
	• If you change the “Amp Gain” setting from
	“High PWR” to “Low PWR” while the volume level is
	set higher than “Volume 30,” the unit automatically
	changes the volume level to “Volume 30.”

Disc setup menu

•When the language you have selected is not recorded on a disc, the original language is automatically used as the initial language. In addition, for some discs, the initial languages settings will not work as you set due to their internal disc programming.

•When you select “16:9” for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width.

•Even if “4:3 PAN SCAN” is selected, the screen size may become “4:3 LETTERBOX” for some discs.

Available characters

Upper case

Lower case

Numbers and symbols

About sounds reproduced through the rear terminals•Through the analog terminals (Speaker out/ LINE OUT):

2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. DTS sound cannot be reproduced. (AUDIO—DOWN MIX: see page 51.)

•Through DIGITAL OUT (optical):

Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted through this terminal. (For more details, see table on page 59.)

To reproduce multi-channel sounds such as Dolby Digital, DTS, and MPEG Audio, connect an amplifier or a decoder compatible with these multi-channel sources to this terminal, and set “DIGITAL AUDIO OUTPUT” correctly. (See page 51.)

•About Dual Zone:

Through the 2nd AUDIO OUT, 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. (See page 27.)

On-screen guide icons

During playback, the following guide icons may appear for a while on the monitor.

: Playback

: Pause

: DVD-Video/VCD: Forward slow motion : DVD-Video: Reverse slow motion

: Forward search : Reverse search

DVD: The following icons appear at the beginning of a scene containing:

: Multi-subtitle languages

: Multi-audio languages : Multi-angle views

58