ENGLISH

Changing the source

•If you change the source, playback also stops (without ejecting the disc).

Next time you select “DISC” for the playback source, disc play starts from where it has been stopped previously.

USB operations

•Connecting a USB device automatically changes the source to “USB.”

•While playing from a USB device, the playback order may differ from the one from other players.

•This unit may be unable to play back some USB devices or some files due to their characteristics or recording conditions.

•Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose.

•When connecting a USB mass storage class device, refer also to its instructions.

•Connect one USB mass storage class device to the unit at a time. Do not use a USB hub.

•This unit is compatible with the USB Full-Speed.

•If the connected USB device does not have the correct files, “No File” appears.

•This unit can play back MP3 files recorded in VBR (variable bit rate).

•The maximum number of characters for folder and file names is 25 characters; 128 characters for MP3/ WAV and 64 characters for WMA Tag information.

•This unit can recognize a total of 5 000 files and 250 folders (999 files per folder).

•The unit cannot recognize a USB mass storage class device whose rating is other than 5 V and exceeds 500 mA.

•USB devices equipped with special functions such as data security functions cannot be used with the unit.

•Do not use a USB device with 2 or more partitions.

•This unit may not recognized a USB device connected through a USB card reader.

•This unit may not play back files in a USB device properly when using a USB extension cord.

•This unit cannot assure proper functions or supply power to all types of USB devices.

•For MPEG1/2 files: The maximum bit rate for video signals (average) is 2 Mbps.

Bluetooth operations

General

•While driving, do not perform complicated operation such as dialing the numbers, using phone book, etc. Stop your car in a safe place before you perform these operations.

•Some Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device.

•This unit may not work for some Bluetooth devices.

•Connecting condition may vary depending on the circumstances around you.

•When the unit is turned off, the device is disconnected.

appears when the connection is established.

Appears when the Bluetooth phone is connected.

Appears when the Bluetooth audio player is connected.

Appears when the Bluetooth phone and

Bluetooth audio player are connected.

Icons for phone types

These icons indicate the phone type set on the device:

 

 

 

:

Cellular phone

 

:

General

 

 

 

 

 

 

 

 

 

 

 

Household phone

 

 

Other than above

 

 

 

:

 

:

 

 

 

 

 

Office

 

 

Unknown

 

 

 

:

 

:

 

 

 

 

 

 

 

 

 

 

 

Warning messages for Bluetooth operations

•Connection Error:

The device is registered but the connection has failed. Use “Connect” to connect the device again. (See page 29.)

56