![](/images/new-backgrounds/1307067/30706737x1.webp)
|
| INITIAL SETTINGS EN 19 | |
Auto Set Up |
| ATTENTION: | |
| AAUTOB blinks on the front display panel; do NOT press any button | ||
Auto Channel Set/Auto Clock Set/Auto Guide | on the unit or remote control until the front display panel shows | ||
A– | |||
|
| ||
Programme Number Set |
| ● When you have connected the unit to a TV offering | |
| |||
|
| on, the unit automatically performs the Preset Download | |
After the A button on the unit (or DVD A on the remote | (A pg. 20) even if you select AAUTO SETB for Auto Set Up | ||
control) is pressed for the first time to turn on the unit, the Auto | function. | ||
Set Up function sets the tuner channels, clock and Guide |
| ||
Programme numbers automatically. |
| ATTENTION: | |
|
| Once you have performed Auto Set Up, even if the unit’s | |
|
| memory backup has expired, all the stored stations and their | |
|
| Guide Programme numbers remain in the unit’s memory and the | |
|
| unit will not perform Auto Set Up again. The unit only performs | |
|
| Auto Clock Set when the unit is turned on. | |
1 |
| If you have moved to a different area, perform each setting as | |
| required. | ||
|
| ||
CABLE/SAT | ● Tuner setting (A pg. 75) | ||
TV | DVD | ● Clock setting (A pg. 78) | |
|
| ||
|
| If a new station starts broadcasting in your area, perform tuner | |
DVD A |
| setting. (A pg. 75) | |
|
| NOTES: | |
|
| ● In areas where no TV station transmits a PDC (Programme | |
|
| Delivery Control) signal, the unit can perform neither Auto Clock | |
|
| Set nor Auto Guide Programme Number Set. | |
|
| ● If there is a power cut, or if you press A or SET UP while Auto | |
ENTER |
| Set Up is in progress, Auto Set Up will be interrupted; be sure to | |
| turn off the unit power once and try again from step 1. | ||
Selection Keys | |||
FGDE |
| ● Auto Clock Set may not function properly depending on the | |
|
| reception condition. | |
|
| After AAuto Set UpB is completed, perform AMonitor SetB on | |
|
| page 23. |
Before starting, make sure of the following:
●The TV aerial cable should be connected to the unit.
●The unit’s mains power cord should be connected to a mains outlet.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/SAT/DVD switch to DVD.
1Press A on the unit or DVD A on the remote control to turn on the unit. The AUTO
2Press selection keys to select AAUTO SETB, then press ENTER. The AUTO SET screen will appear.
●When AUTO SET is
completed, ASCAN | INITIAL SET UP > AUTO CH SET |
|
|
| |||
|
|
|
|
|
| ||
COMPLETEDB appears on |
|
|
|
|
|
| |
the TV screen. Select |
|
|
|
|
|
| |
AOKB. |
| AUTO SET |
|
|
| ||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| AUTO SET |
|
| PLEASE WAIT... |
|
| CANCEL |
SET UP | ENTER | SELECT WITH @ THEN PRESS [ENTER] |
|
| PRESS [SET UP] TO EXIT |
EXIT | SELECT |
|