JVC LPT1029-001A manual Recording, HDD Deck Only

						TIMER RECORDING EN 51
	Automatic Satellite Programme
						● Make sure the satellite receiver is connected to the unit’s [L-2
						IN/DECODER] connector.
	Recording					● Programme the timer on the satellite receiver.
						● Slide the TV/CABLE/SAT/DVD switch to DVD.
	(HDD Deck Only)
						1 Press HDD to choose the recording deck.
						2 Set AL-2 SELECTB to ASAT VIDEOB or ASAT S-VIDEOB.
This function allows you to automatically record a satellite
						(A pg. 67)
programme which is timer programmed on your external satellite						● Also refer to AIMPORTANTB on page 70.
receiver. Connect a satellite receiver to the unit’s [L-2 IN/						3 Press REC MODE repeatedly to set the recording mode.
DECODER] connector and programme the timer on the satellite
						4 Press and hold SATj for about 2 seconds to engage the
receiver. The unit starts or stops recording by the signals input
from the satellite receiver. After recording, the unit’s power shuts						Automatic Satellite Programme Recording mode. ASATjB
off automatically.						appears on the front display panel.
						NOTES:
ATTENTION:
						● To disengage the Automatic Satellite Programme Recording
● When you record programmes by connecting to a digital						mode, press SATj.
		terrestrial receiver (Freeview receiver or similar), perform the				● If the unit’s power is off, it is not possible to engage the Automatic
		same steps as AAutomatic Satellite Programme Recording				Satellite Programme Recording mode.
		(HDD Deck Only)B (A pg. 51). It is not possible to operate the				● In step 4, if ASATjB blinks quickly on the front display panel even
		digital terrestrial receiver (Freeview receiver or similar) by				though your satellite receiver’s power is off, Automatic Satellite
		using the provided satellite controller.				Programme Recording will not work properly with that satellite
● Be sure not to turn on the satellite receiver before the						receiver*. If this is the case, perform AManual Timer
		programme is executed; otherwise, the unit will start recording				ProgrammingB (A pg. 49) to timer record a satellite programme.
		when the satellite receiver’s power is turned on.				* Some satellite receivers output signals even if the power is off. Automatic
● If you have connected another appliance other than a satellite						Satellite Programme Recording is not possible with those satellite
		receiver to the [L-2 IN/DECODER] connector, be sure not to				receivers.
		engage the Automatic Satellite Programme Recording mode;				● ASATjB blinks on the front display panel while Automatic
		otherwise, the unit will start recording when the connected				Satellite Programme Recording is in progress.
		appliance’s power is turned on.				● For timer programming of the satellite receiver, refer to the
● Automatic Satellite Programme Recording and timer recording						instruction manual of the satellite receiver.
		cannot be done at the same time.				● Automatic Satellite Programme Recording is not possible if your
						satellite receiver does not have a timer.
					HDD	● Pressing the unit’s A button while Automatic Satellite
						Programme Recording is in progress turns off the unit’s power
						and disengages the Automatic Satellite Programme Recording
						mode.
						● If there are more than one satellite programmes you wish to
						record with Automatic Satellite Programme Recording, it is not
						possible to set different recording modes for each programme.
						● Depending on the type of satellite receiver, the unit may not
				CABLE/SAT		record a slight portion of the beginning of the programme or may
						record slightly longer than the actual length of the programme.
				TV	DVD
						● If you engage the Automatic Satellite Programme Recording
			HDD			mode when the satellite receiver’s power is on, the unit will not
						start Automatic Satellite Programme Recording even though
						ASATjB blinks on the front display panel. When the satellite
						receiver shuts off once and is turned back on again, the unit
						starts recording.
						● You can also record a programme from your cable system in the
						same way if the system has a timer.
						● Just Clock (A pg. 78) does not work when the Automatic
						Satellite Programme Recording mode is engaged.

REC MODE

SAT#