|
| EDITING EN 61 | ||
Manual Dubbing (From HDD To DVD) | About Disc Remaining Display |
| ||
|
| When dubbing from HDD to DVD, the unit displays the time | ||
It is possible to perform dubbing in the desired transfer rate. | ||||
information for dubbing by bar meter. By comparing the disc | ||||
1 | Load a recordable disc. | remaining time and the necessary time for dubbing of the selected | ||
2 | Press DUBBING to access the Dubbing Menu screen. | items, it is possible to check if the dubbing can be performed | ||
completely or not. | ||||
3 | Press selection keys to select AHDDNDVDB, then press | |||
When performing the High Speed Dubbing | ||||
| ENTER. | |||
4Press selection keys to select AMANUALB, then press ENTER.
5Perform step 5 of AHigh Speed Dubbing (From HDD To DVD)B (A pg. 60). The Manual Dubbing screen appears.
6Press selection keys to select AREC MODEB, then press ENTER. Press selection keys to select the desired option, then press ENTER.
7Press selection keys to select ACONFIRMB, then press
ENTER.
Capacity of a disc | Remaining capacity |
21%
Dark green: Length of already recorded item
Light green: Length of selected item
Yellow: Length of the item now being selected by arrow
Red: Excess over the capacity
8Press selection keys to select AEXECUTEB or AAUTO PWR OFFB, then press ENTER to start dubbing.
●If AAUTO PWR OFFB is selected, the unit will turned off after dubbing is completed.
NOTES:
●In Video mode, if the selected play list includes the scenes recorded in the different transfer rate, the dubbing is performed in the highest transfer rate of the scenes in the selected play list. However, the lower transfer rate cannot be dubbed in the higher transfer rate.
●The recordable time of the disc is displayed on the bar meter. For details, refer to AAbout Disc Remaining DisplayB (A pg. 61).
●During dubbing, it is not possible to play back on HDD or DVD, or to set timer programming.
Original Dubbing (From DVD To HDD)
It is possible to dub the original recordings on DVD discs to the HDD deck.
1Load a disc you want to dub.
2Press DUBBING to access the Dubbing Menu screen.
3Press selection keys to select ADVDNHDDB, then press
ENTER.
When performing the Just Dubbing
TOTAL 105MIN
●The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate.
●The total time of a loaded disc is displayed on the right of the bar meter.
When performing the Manual Dubbing
MAX FR240
●The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate.
●The available highest transfer rate is displayed on the right of the bar meter.
NOTE:
The bar meter moves up and down regularly, but this is not a malfunction.
4Press selection keys to select indexes (small pictures) of desired original recordings and/or play lists, then press MARK. After selecting all indexes you want to dub, press ENTER.
●You can select up to 8 original recordings and/or play lists.
5Press selection keys to select AEXECUTEB or AAUTO PWR OFFB, then press ENTER to start dubbing.
●If AAUTO PWR OFFB is selected, the unit will turned off after dubbing is completed.
NOTES:
●It is not possible to dub play lists on DVD discs.
●It is not possible to dub
●It is not possible to dub Video CDs/SVCDs or Audio CDs.
