JVC LPT1029-001A manual Timer Programming, Video Plus+, Press the number keys

TIMER RECORDING EN 47

VIDEO Plus+	®	Timer Programming		7 The PlusCode number you entered and the matching timer
				recording information are displayed on the TV screen. Check
				the programme data.
You can programme this unit to timer record as many as				● To cancel this setting, press RETURN.
16 programmes.
With the VIDEO Plus+ system, timer programming is greatly				IMPORTANT:
simplified because each TV programme has a corresponding code				Make sure the channel position number you wish to record is
number which your unit is able to recognise.				displayed; if not, see AVIDEO Plus+® System SetupB (A pg. 74)
You can use the remote control to enter the PlusCode number.				and set the Guide Programme number correctly.
● Make sure that the unit’s built-in clock is set properly.				8 Press selection keys to select the desired recording option as
● Turn on the unit.				required. Press selection keys to select the desired setting,
● Turn on the TV and select the AV mode.				then press ENTER.
● Slide the TV/CABLE/SAT/DVD switch to DVD.				● AINPUT TITLEB (A pg. 54, AModify Title NameB)
				● ACATEGORYB (A pg. 54, AModify CategoryB)
		CABLE/SAT		● AVPS/PDCB (A pg. 48, AVPS/PDC RecordingB)
				● AWEEKLY/DAILYB (A pg. 48, AWeekly/Daily RecordingB)
		TV	DVD
				● AREC MODEB (A pg. 37, ARecording ModeB)
				9 Press selection keys to select AOKB, then press ENTER to
				access the Programme Confirmation screen.
0 – 9				10 Press selection keys to select AEXITB, then press ENTER to
				complete timer programming.
				● To programme another timer, press selection keys to select
		PROGRAMME		ACONTINUEB, then press ENTER.
				● If APROGRAMME OVERLAPPEDB appears on the TV screen,
ENTER		Selection Keys		delete or modify the programmes.
		FGDE		NOTES:
		RETURN
				● There may be cases that the VIDEO Plus+® Timer Programming
				function prolongs the stop time of the programming.
				● When two successive programmes are recorded on a DVD-RW
				disc with the VIDEO Plus+® Timer Programming function, the
				beginning of the second one may be left off the recording.
DISPLAY				● If the copy limited programme is received during timer recording,
				the unit enters Record Pause mode. Recording starts again if it is
VPS/PDC#				switched to a recordable broadcast during the time you
				programmed.
				IMPORTANT:
1 Load a recordable disc if recording to DVD.				If you have moved to a different area or if a broadcasting
				station’s channel number has been changed, the wrong channel
2 Press PROGRAMME to access the programme top screen.				number will be displayed on the VIDEO Plus+ programme
3 Press selection keys to select AVIDEO PLUS+B, then press				screen in step 7. When this happens, set the correct Guide
				Programme number for that station. (A pg. 74, AVIDEO Plus+®
ENTER.				System SetupB)
● When APROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMMESB appears on the TV screen, you need to

cancel some of the reserved programmes. (A pg. 50)						Satellite Receiver Users
4 Press the number keys			123 PROGRAMME > SHOWVIEW (1/2)			To timer record a satellite broadcast using the VIDEO Plus+
to enter the PlusCode						system:
number of a programme			PLUSCODE NO.			A Perform ASatellite Receiver Control SettingB (A pg. 24).
you wish to record.			1 2 3 4			B Perform AVIDEO Plus+	®	Timer ProgrammingB (A pg. 47).
OR	SELECT WITH @		1	2	3	C Leave the satellite receiver’s power on.
	THEN PRESS [ENTER]
Press selection keys to			4	5	6
	PRESS [PROGRAMME]		7	8	9
select the desired
	TO EXIT		DELETE	0	DELETE ALL
number key on the			RECORD TO		DVD
screen, then press	PROGRAMME	ENTER
ENTER. Repeat to enter	EXIT	SELECT			CONFIRM
all required numbers.

●If you have made a mistake, press selection keys to select

ADELETEB or ADELETE ALLB, then press ENTER and input the correct number before you press ENTER again.

5Press selection keys to select ARECORD TOB, then press ENTER. Press selection keys to select the desired recording deck, then press ENTER.

6Press selection keys to select ACONFIRMB, then press

ENTER.

●If the number you entered is invalid, APLUSCODE NO. ERROR CONFIRM PLUSCODE NO. THEN RETRYB appears on the TV screen. Input a valid PlusCode number.

●If AGUIDE PROGRAMME IS NOT SET SET GUIDE PROGRAMME THEN RETRYB appears on the TV screen, set Guide Programme Numbers manually. (A pg. 74)