JVC LPT1100-001A manual Manual Channel Set

SUBSIDIARY SETTINGS EN 75

8 View the Confirmation screen.

Manual Channel Set

AAUTO SET COMPLETEDB or ASCAN COMPLETEDB is

Store channels that were not stored during Auto Set Up

displayed on the TV screen. Select AOKB.

9 Press SET UP to complete the setting.

(A pg. 17), Preset Download (A pg. 18) or Auto Channel Set

(A pg. 74).

● Using the Confirmation screen, you can skip or add channel

1 Press SET UP to access the Main Menu screen.

positions, enter station names and perform other operations.

Refer to pages 75 – 76 for the procedures.

2 Press selection keys to select AINITIAL SET UPB, then press

● Depending on reception conditions, the stations may not be

G.

stored in order, and the station names may not be stored

3 Press selection keys to select ATUNER SETB, then press G.

correctly.

● For information on scrambled broadcasts, refer to AWhen

4 Press selection keys to select AMANUAL CH SETB, then press

Receiving A Scrambled Broadcast (HDD & DVD Deck Only)B

ENTER. The Manual Channel Set screen appears.

(A pg. 76).

5 Press selection keys to select AEDITB, then press ENTER.

6 Press selection keys to select

(Example) To store in position 12.

IMPORTANT:

a blank position in which you

● In certain reception conditions, station names may not be

INITIAL SET UP > MANUAL CH SET

want to store a channel, then

stored correctly, and Auto Guide Programme Number Set may

PR

CH

ID

PR CH

ID

press ENTER. The

not work properly. When the Guide Programme numbers are

01

C01

----

07

----

Confirmation screen appears.

02

02

CTEA

08

----

not set properly, the programme that you do not intended to

03

05

1000

09

----

7 Press selection keys to select

record will be timer recorded by the SHOWVIEW system of the

04

C79

3SAT

10

----

05

01

9LIV

11

----

unit. When programming the timer using the SHOWVIEW

ABANDB, then press ENTER.

06

04

AB3

12

----

system, be sure to check the desired channel is selected

<

>

MOVE

EDIT

RETURN

correctly. (A pg. 44)

The programme currently

● Your unit memorises all receivable stations even if reception of

some of them is poor. You can delete those stations with an

received on the selected channel

unacceptable picture from the list. (A pg. 76, ADelete A

position appears behind the

confirmation screen.

ChannelB)

8 Press selection keys to

NOTES:

change the band between CH

INITIAL SET UP > MANUAL CH SET

● Fine tuning is performed automatically during Auto Channel Set.

(regular) and CC (cable), then

BAND

CH

If you want to perform tuning manually, refer to AFine-Tuning

press ENTER.

CH

2

ID

----

Channels Already StoredB (A pg. 76).

9 Press selection keys to select

FINE

● If you perform Auto Channel Set when the aerial cable is not

ACHB, then press ENTER.

DECODER

OFF

connected properly, ASCAN COMPLETED –NO SIGNAL–B

RETURN

appears on the TV screen in step 8. In such a case, make sure of

10 Press selection keys to

SET UP

ENTER

SELECT WITH @ THEN PRESS [ENTER]

EXIT

SELECT

PRESS [SET UP] TO EXIT

the aerial connection and press ENTER; Auto Channel Set will

input the channel number

start again.

you want to store.

● If no sound accompanies the picture or the audio sounds

● To enter the registered station name (A pg. 88), press

unnatural on some channels that have been stored by Auto Set

selection keys to select AIDB, then press ENTER. Press FG.

Up, the TV system setting for those channels may be incorrect.

● For fine tuning adjustment, press selection keys to select

Select the appropriate TV system for those channels. (A pg. 76,

AFINEB, then press ENTER. Press FG to perform fine-tuning.

AINFORMATIONB)

● When storing a channel that sends scrambled broadcasts,

press selection keys to select ADECODERB, then press

ENTER. Press selection keys to set ADECODERB to AONB

(AOFFB is the default setting).

● When AL-2 SELECTB is set to AVIDEOB, AS-VIDEOB, ASAT

VIDEOB or ASAT S-VIDEOB, the ADECODERB setting cannot

be changed. (A pg. 63)

11 Press ENTER to enter new channel information. The

Confirmation screen appears.

12 Press SET UP or RETURN to close the Confirmation screen.

● To change positions, see AChange Station Channel PositionB

(A pg. 76).

● If you wish to set station names other than the ones registered

in your unit, see ASet Stations (B)B (A pg. 76).

ATTENTION:

Guide Programme numbers are not set when channels are

stored manually. (A pg. 74, ASHOWVIEW System SetupB)