JVC LPT1100-001A manual Dubbing From DV To HDD, Dubbing An Entire Cassette

● ASUPERIMPOSEB is automatically set to AOFFB. It will return to AAUTOB after dubbing is completed.

● When there are blanks on the tape of more than 2 seconds, the HDD deck will enter into pause mode while playback on DV deck continues. This also applies to portions of the DV tape that are damaged or unreadable. The last image is displayed on the TV screen. Dubbing will resume once recorded portion is detected. If the blank portion continues until the end of the tape, ADUBBING COMPLETEDB appears on the TV screen when the tape end is reached and the tape rewinds automatically.

● Dubbing copyright guarded tape is not possible. ● When dubbing is in progress, only o is functional.

Dubbing From DV To DVD (Dubbing An Entire Cassette)

It is possible to perform automatic dubbing of all the recorded programmes of a cassette from the DV deck to the DVD deck using the AENTIREB dubbing. You cannot select the images to be dubbed; all recorded images on the DV cassette will be dubbed.

58 EN EDITING

Dubbing From DV To HDD	8 Press selection keys to select AEXECUTEB, then press
(Dubbing An Entire Cassette)	ENTER for confirmation.
	● Once dubbing starts, it will continue dubbing until the end of the
	tape is reached.
It is possible to perform automatic dubbing of all the recorded
	● To cancel the dubbing, press o then selection keys to select
programmes of a cassette from the DV deck to the HDD deck using
	ACANCELB and press ENTER to confirm.
the AENTIREB dubbing. You cannot select the images to be
	● If the tape is not rewind, the unit will start dubbing after
dubbed; all recorded images on the DV cassette will be dubbed.
	automatically rewinding the tape to the beginning.
1 Load the Mini DV cassette you want to dub. Make sure its erase
	9 Upon completing dubbing, the tape stops and ADUBBING
protection switch is set to ASAVEB.
	COMPLETEDB appears on the TV screen. Press ENTER to
● Set ADV AUDIO RECB to the appropriate mode. (A pg. 72)
	end.
2 Press DUBBING to access the Dubbing Menu screen.
	● The tape will automatically be rewound.
3 Press selection keys to select ADVNHDDB, then press	NOTES:
ENTER.	● ASUPERIMPOSEB is automatically set to AOFFB. It will return to
4 Select AENTIREB, then press ENTER.	AAUTOB after dubbing is completed.
5 Press selection keys to select ASELECT REC. MODEB, then	● The programme information at the DV deck will not be dubbed.
	● When there are blanks on the tape of more than 2 seconds, the
press ENTER. Press selection keys to select the desired
	DVD deck will enter into pause mode while playback on DV deck
option, then press ENTER.
	continues. This also applies to portions of the DV tape that are
6 Press selection keys to select ASELECT SND. MODEB, then
	damaged or unreadable. The last image is displayed on the TV
press ENTER. Press selection keys to select the desired	screen. Dubbing will resume once recorded portion is detected. If
option, then press ENTER.	the blank portion continues until the end of the tape, ADUBBING
7 Press G to select ACONFIRMB, then press ENTER. The	COMPLETEDB appears on the TV screen when the tape end is
confirmation screen appears.	reached and the tape rewinds automatically.
8 Press selection keys to select AEXECUTEB, then press	● Dubbing copyright guarded tape is not possible.
	● When dubbing is in progress, only o is functional.
ENTER for confirmation.
● Once dubbing starts, it will continue dubbing until the end of the	About Disc Remaining Display
tape is reached.
● To cancel the dubbing, press o then selection keys to select	When dubbing from HDD to DVD, the unit displays the time
ACANCELB and press ENTER to confirm.	information for dubbing by bar meter. By comparing the disc
● If the tape is not rewind, the unit will start dubbing after	remaining time and the necessary time for dubbing of the selected
automatically rewinding the tape to the beginning.	items, it is possible to check if the dubbing can be performed
9 Upon completing dubbing, the tape stops and ADUBBING	completely or not.
COMPLETEDB appears on the TV screen. Press ENTER to	When performing the High Speed Dubbing
end.	Capacity of a disc	Remaining capacity
● The tape will automatically be rewound.

NOTES:

21%

Dark green: Length of already recorded item

Light green: Length of selected item

Yellow: Length of the item now being selected by arrow

Red: Excess over the capacity

When performing the Just Dubbing

TOTAL 105MIN

1Load the Mini DV cassette you want to dub. Make sure its erase protection switch is set to ASAVEB.

●Set ADV AUDIO RECB to the appropriate mode. (A pg. 72)

2Press DUBBING to access the Dubbing Menu screen.

3Press selection keys to select ADVNDVDB, then press ENTER.

4Select AENTIREB, then press ENTER.

5Press selection keys to select ASELECT REC. MODEB, then press ENTER. Press selection keys to select the desired option, then press ENTER.

6Press selection keys to select ASELECT SND. MODEB, then press ENTER. Press selection keys to select the desired option, then press ENTER.

7Press G to select ACONFIRMB, then press ENTER. The confirmation screen appears.

●The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate.

●The total time of a loaded disc is displayed on the right of the bar meter.

When performing the Manual Dubbing

MAX FR240

●The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate.

●The available highest transfer rate is displayed on the right of the bar meter.