JVC LPT1100-001A manual Live Memory Playback, Recording/playback Status Display

LIVE MEMORY PLAYBACK ON HDD/DVD DECK EN 41

Live Memory Playback

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

●Press DV/HDD/DVD SELECT on the unit repeatedly to select the HDD or DVD deck.

This unit records pictures onto the hard disk and DVD-RAM disc, instead of video tapes, then plays back the pictures recorded on the disc. This makes it possible to achieve high-speed writing and read-out that has not been possible with conventional VCRs, enabling recording and playback simultaneously.

	High-speed spin
Recording	Playback
(High-speed writing)	(High-speed read-out)

Recording/playback Status Display

CABLE/SAT

TV DVD

LIVE

NAVIGATION

Press NAVIGATION to display Library Database Navigation menu, then choose a programme to play back. (A pg. 49)

o

R

ON SCREEN

Live Memory Playback status can be checked by pressing ON SCREEN to display the bar meter on the superimpose display. The current status is superimposed on the TV screen. (A pg. 14, AWhen using Live Memory playbackB)

LIVE CHECK

It is called ALive Memory PlaybackB to start playback of the programme being recorded, with a time-lag between a recording point and a playback point, as shown in the figure below.

Current playback point (Live Memory Playback)

		Current recording position
Recording start point		(Recording point)
				Recording
		Playback
		continues		continues
0	30 min.		1	hour
	Currently elapsed recording time

Not only can this unit play back a programme previously recorded while recording or timer recording another programme, but the unit also allows you to play back from the beginning of a programme while continuing to record the same programme.

NOTES:

●Live Memory Playback could be performed approximately 30 seconds after recording has started on the DVD-RAM disc. However, for HDD, Live Memory Playback is possible right after recording has started.

●Although high-speed search up to approximately 30 seconds before the current recording point is possible during Live Memory Playback, once the current recording point is reached, the unit resumes normal playback and maintains a delay of approximately 30 seconds so that recording and playback can continue.

●When using Live Memory Playback during timer recording, playback continues even after the end of the recording.

●When using Live Memory Playback during timer recording on the DVD-RAM disc, the next timer recording will be recorded to the HDD deck even though recording on the DVD deck has stopped. (A pg. 46, ARelief RecordingB)

●It is impossible to perform ITR even if you press R on the unit during Live Memory Playback while in normal recording or RetroActive Recording. (A pg. 36)

Press o to display the programme being recorded, then perform ITR settings.

●It is possible to perform ITR during Live Memory Playback while

in temporary recording for Live Memory (HDD deck only). Press R to stop Live Memory Playback and activate normal recording, then perform ITR settings.

●It is impossible to perform ITR during Live Memory Playback while in timer recording.

●Playback may be paused for a moment during Live Memory Playback, which does not interfere with recording.

●Live Memory Playback cannot be performed while recording the source from DV input. (A pg. 59, ADV Dubbing (HDD & DVD Deck Only)B)

●When LIVE CHECK is pressed to display the picture currently being recorded, the picture size may not be correct.

●Press o or LIVE to stop Live Memory Playback.

●Live Memory Playback cannot be performed while the DVD deck is recording as temporary recording on HDD stops during recording on DVD.