– 22 –
English

Changing the Source Name

You can change the source name of the external component
according to the one connected to the unit.
You cannot change the source names while recording.
On the remote control ONLY:
1
When the source is “LINE*,” press and hold
TUNER/LINE until “NAME CHANGE” appears in
the main display.
* If you have changed the source name of the external
component, the currently selected source name will appear.
2
Press SELECT ¢ or SELECT 4 to select an
appropriate source name.
Each time you press the button, the source name
changes as follows:
LINE TAPE DBS VCR TV
GAME (back to the beginning)
To cancel the setting, press CANCEL.
3
Press SET to finish changing the source name.
The selected source name appears in the main display.
Ex. When selecting “TAPE”
EN20-22_NX-HD10[J_C]f.pm6 02.6.14, 10:21 PM22