JVC NX-HD10 manual 30

– 30 –
English
If assigned titles (album title or track title) are long
and cannot be shown at a time
The unit keeps scrolling the title to show the entire title.
About HDD indicator
About HDD lamp
(when dimmer is not activated)
• Blue (flashes) : HDD is preparing for playback.
(During this period, no remote control
operations are accepted.)
• Blue (lights) : HDD is now ready for playback and
for recording, or it is now playing or
pausing.
• Red (flashes) : HDD is preparing for recording.
• Red (lights) : HDD is now recording.
Basic HDD Operations
While playing a track recorded in the HDD, you can do the
following operations.
To stop playback for a moment
Press HDD 3/8.
To resume play, press HDD 3/8 again.
To locate a particular point in a track during play
Press and hold ¢ or 4 during play.
•¢: Fast-forwards the tracks.
•4: Fast-reverses the tracks.
To go to another track
Press ¢ or 4 repeatedly.
•¢: Skips to the beginning of the next or succeeding
tracks.
•4: Goes back to the beginning of the current or
previous tracks.
Before starting play, you can continuously skip or go back
to any track by holding the button.
To change the information shown in the main display
Each time you press DISP/CHARA on the remote control,
the information in the main display changes as follows:
•Before playing—
1Current album number
2Total track number in the current album
3Current library number (or assigned name)
4Album title* appears following “ALBUM TITLE”
5Total playing time of the current album
* If no title is assigned, “NO TITLE” will appear.
•While playing—
1Current album number
2Current track number
3Current library number (or assigned name)
4Elapsed playing time of the track
5Album title* appears following “ALBUM TITLE”
6Track title* appears following “TRACK TITLE”
* If no title is assigned, “NO TITLE” will appear.
Source is
“HDD,” but no
data is recorded
Ready to
play
During
playback
During
a pause
Continued
Clock
1 2
2
4
3
5
Clock
1 2 4
5
6
3
EN28-37_NX-HD10[J_C]f.pm6 02.6.15, 0:24 PM30