– 40 –
English
3
Press SET.
The SMART COMP. indicator lights up on the display.
• To cancel the setting, press AUTO MODE.
4
Press SELECT ¢ or SELECT 4 to select the bit
rate—“AAC128kbps” or “AAC 96kbps.”
5
Press SET again to finish the setting.
To deactivate the function, repeat steps
1
to
3
, and select
“OFF?” in step
2
. The SMART COMP. indicator goes off.
How Smart Compression actually works?
When you turn off the unit by pressing STANDBY/ON
or by using timers or Auto Power off (see pages 63 to 68),
data compression automatically starts.
The display dims, and the SMART COMP. indicator starts
flashing on the display. The STANDBY/ON lamp also
starts flashing in green.
When the compression is complete, Smart Compression is
turned off automatically, and the unit goes into standby
mode (the STANDBY/ON lamp stops flashing and remains
lit in red.)
• It may take a long time (the sum of the playing times of
all existing linear PCM tracks plus searching time) for
the unit to compress all the PCM tracks. By pressing
STANDBY/ON again, you can stop compression
and make the unit go into standby mode.
Smart Compression always works even if no linear
PCM track has been recorded
When you turn off the unit with Smart Compression turned on, it
always works because the unit starts searching for linear PCM
tracks.

Using Automatic Recording Functions

This unit features three Auto Modes—Smart Compression,
CD Auto Recording, and Tuner Auto Recording.
You can activate these functions whether playing a source
or not (the unit must be turned on).
•Smart Compression (SMART COMP.) : See below.
To automatically compress linear PCM tracks into AAC
formated data.
•CD Auto Recording (CD AUTO REC) : See page 41.
To automatically record a CD when playing back a CD
entirely (from the first track to the last) in Normal play
(see page 24).
•Tuner Auto Recording (TU AUTO REC) : See page
42.
To automatically record broadcasts when a station is
tuned in.
Auto Modes cannot be set while recording into the
HDD.

To automatically compress linear PCM tracks—

Smart Compression

You can automatically search for linear PCM tracks and
compress (encode) the linear PCM tracks into AAC
formated data when you turn off the unit. You can select
your desired bit rate—96 kbps or 128 kbps.
On the unit ONLY:
1
Press AUTO MODE repeatedly until “SMART
COMP.” appears in the main display.
• Each time you press the button, Auto Modes change
as follows:
2
Press SELECT ¢ or SELECT 4 to select “ON?”
SMART COMP. CD AUTO REC
TU AUTO REC
Canceled
SMART
COMP.
AAC128
SMART COMP.
indicator
Ex. When you have selected “AAC128kbps”
Ex. When the function is currently turned “OFF”
(initial setting)
Continued
SMART
COMP.
AAC128
SMART
COMP.
AAC128
EN38-47_NX-HD10[J_C]f.pm6 02.6.15, 0:25 PM40