JVC SR-9080 appendix Preparation, Playback, 5To stop playback

7	PLAYBACK AND SPECIAL-EFFECTS PLAYBACK
U model
	[STOP] button Playback mode indicator
	[OPERATE] indicator
	�
	SR-9080U
	REC

7 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK

E model

[STOP] button Playback mode indicator

[OPERATE] indicator

�

SR-9080E

REC

REC	STOP	REC						EJECT OPERATE
		CHECK				OPERATE
						HDR	RESET/	ON SCREEN
							CANCEL
REW REVERSE PAUSE		PLAY FF						SHIFT
		TRACKING		V. LOCK		TIMER SEARCH DISPLAY LOCK CNT RESET	MENU	TIME MODE
FIELD REV		–	+	–	+			– S E T +
		FIELD ADV

[OPERATE] button

REC	STOP	REC						EJECT OPERATE
		CHECK				OPERATE		[OPERATE] button
							RESET/
							CANCEL	ON SCREEN
REW REVERSE PAUSE		PLAY FF						SHIFT
		TRACKING		V. LOCK		TIMER SEARCH DISPLAY LOCK CNT RESET	MENU	TIME MODE
FIELD REV		–	+	–	+			– S E T +
		FIELD ADV

[HDR] indicator	1
[PLAY] button	[TIME MODE+/–] button

[PLAY] button

[TIME1 MODE+/–] button

	7-1 Preparation
Connection
Connect the output connectors on the rear panel correctly.
Menu switch setting
Set the menu switches in <VIDEO/VTR MODE> as
required.
5	[V. PULSE] ... Factory setting: OFF
	Set to “ON” to add V. pulse in the normal play (2H or
	6H) mode.
5	[CNT MEM SW] ... Factory setting: ON
	Counter memory ON/OFF.

•Set to “ON” to use the counter memory function.

5	[AUTO REW] ... Factory setting: OFF
	Automatic rewind ON/OFF.
	• Set to “ON” to rewind the tape to the beginning when
	the tape ends.

5	[REPEAT PLAY] ... Factory setting: OFF
	Repeat playback ON/OFF.

•Set to “ON” to execute repeat playback.

*To listen to the sound recorded in the L12H, L18H and L24H modes, play the tape back in the same mode used for recording (L12H, L18H or L24H).

*When a tape recorded in the 2H mode is played back in the L12H or L24H mode, noise appears in the picture.

When a tape recorded in the 6H mode is played back in the L18H mode, noise appears in the picture.

Press the [TIME MODE +/–] button to set the playback speed to 2H or 6H and start playback.

*Noise may appear in the picture with tapes not recorded on the SR-9080U.

7-2 Playback
	Press the [OPERATE] button to turn the operating mode
	on.
2The [OPERATE] indicator lights.
	Press the [TIME MODE +/–] button to set the play mode
	to 2H (SP) or 6H (EP) mode.
	The [2H] or [6H] indication is shown on the display.
	• To play back a tape recorded in the timelapse mode
	at slow speed, press the [TIME MODE +/–] button
	to set the desired mode (L12H, L18H, L24H, 24H
	..... 960H) (slow play).
	• Avoid using slow-motion playback continuously for
3	long periods (more than several hours).
	Load the recorded cassette correctly.
	* If a cassette is loaded when the operating mode is off,
	the operating mode is switched on automatically (auto
	operate on function).
	If the cassette’s safety tab has been removed, the
	operating mode is turned on and play starts
4	automatically (auto play function).
	Press the [PLAY] button to start play.
	The play indicator is shown on the display and
	the Play mode is engaged.
	When a tape recorded in the HDR mode is played back,
	the [HDR] indicator lights.
	* No sound is output in the Timelapse Play mode
	(except for L12H, L18H and L24H modes).
	When the play mode is set to 2H (SP) or 6H (EP),
	playback operates as follows.
	• Cassettes recorded in the 2H or ordinary (SP)
	Timelapse modes are played back in the 2H (SP)
	mode. [2H] is shown on the display.
	• Cassettes recorded in the 6H or HDR Timelapse
	mode are played back in the 6H (EP) mode. [6H] is
	shown on the display

5To stop playback

Press the [STOP] button. The tape stops and the Stop mode is engaged.

	7-1 Preparation
Connection
Connect the output connectors on the rear panel correctly.
Menu switch setting
Set the menu switches in <VIDEO/VTR MODE> as
required.
5	[V. PULSE] ... Factory setting: OFF
	Set to “ON” to add V. pulse in the 3H (SP) play mode.
5	[CNT MEM SW] ... Factory setting: OFF
	Counter memory ON/OFF.

•Set to “ON” to use the counter memory function.

5	[AUTO REW] ... Factory setting: OFF
	Automatic rewind ON/OFF.
	• Set to “ON” to rewind the tape to the beginning when
	the tape ends.

5	[REPEAT PLAY] ... Factory setting: OFF
	Repeat playback ON/OFF.

•Set to “ON” to execute repeat playback.

*To listen to the sound recorded in the L12H and L24H modes, play the tape back in the same mode used for recording (L12H or L24H).

*When a tape recorded in the 3H mode is played back in the L12H or L24H mode, noise appears in the picture.

Press the [TIME MODE +/–] button to set the playback speed to 3H and start playback.

*Noise may appear in the picture with tapes not recorded on the SR-9080E/EK.

*Tapes recorded in the LP mode cannot be played back. In this case, the [LP] indication blinks on the display.

7-2 Playback
	Press the [OPERATE] button to turn the operating mode
	on.
2The [OPERATE] indicator lights.
	Press the [TIME MODE +/–] button to set the play mode
	to 3H (SP) mode.
	The [3H] indication is shown on the display.
	• To play back a tape recorded in the timelapse mode
	at slow speed, press the [TIME MODE +/–] button
	to set the desired mode (L12H, L24H ..... 960H)
	(slow play).
	• Avoid using slow-motion playback continuously for
3	long periods (more than several hours).
	Load the recorded cassette correctly.
	* If a cassette is loaded when the operating mode is off,
	the operating mode is switched on automatically (auto
	operate on function).
	If the cassette’s safety tab has been removed, the
	operating mode is turned on and play starts
4	automatically (auto play function).
	Press the [PLAY] button to start play.
	The play indicator is shown on the display and
	the Play mode is engaged.
	* No sound is output in the Timelapse Play mode
	(except for L12H and L24H modes).

5To stop playback

Press the [STOP] button. The tape stops and the Stop mode is engaged.

46 (U) 46 (E)