7 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK

 

 

 

 

SR-9080U

 

 

REC

REC STOP REC

 

EJECT OPERATE

CHECK

OPERATE

 

 

HDR

RESET/

 

 

CANCEL ON SCREEN

REW REVERSE PAUSE PLAY FF

 

SHIFT

TRACKING

V. LOCK TIMER SEARCH DISPLAY LOCK CNT RESET

MENU TIME MODE

– +

– +

– S E T +

FIELD REV

 

FIELD ADV

 

[SET –] button

[SET +] button

[REW] button [FF] button

[SEARCH] button

[SHIFT f] button

7-4 Alarm Search/Date and Time Search

There are three different ways you can search a tape position. When the [SEARCH] button is pressed, the Search mode is engaged. Each time the [SEARCH] button is pressed, the Search mode changes.

(Once) alarm search: To search the start of an alarm recording.

(Twice) alarm scan: To play back around the start of each alarm recording for several seconds.

(Three times) date/time search: To search for a recording made at a specified date and time. Press the [SEARCH] button four times to cancel the Search mode.

Note on date/time search

7

PLAYBACK AND SPECIAL-EFFECTS PLAYBACK

 

 

 

 

Alarm scan

 

 

Alarm scan screen

The section around the start of each alarm recording is played back for

 

 

 

[MENU]

about 5 seconds.

 

 

ALARM SCAN

* Playback may start a few seconds after the actual start of the alarm

Control or

00H 00M 01S

recording.

 

 

reel

 

 

 

* If the interval between alarm recordings is short, the tape may play

counter

 

 

back continuously for 5 seconds or more.

 

 

 

 

1* Sound is not output.

 

 

 

 

Press the [SEARCH] button twice in the Stop mode.

[The Alarm Scan mode is engaged and the [ALARM SCAN] indication is shown on the monitor screen. The [ALSC] indication is shown in the display’s record/playback speed mode indication section.

2

* To release the Alarm Scan mode, press the [SEARCH] button twice.

 

Press the [FF] or [REW] button.

 

[The VCR fast-forwards or rewinds the tape from the current

 

position and the section around the start of each alarm recording

3

is played back for about 5 seconds.

 

Press the [PLAY] button when you want to start playback.

 

[Normal playback starts and the Alarm Scan mode is canceled.

To cancel alarm search or alarm scan, press the [STOP] button, [PLAY] button, [REVERSE] button or the [REW]/[FF] button (whichever is opposite to the current tape running direction).

When the end or beginning of the tape is reached during alarm search or alarm scan, the mode is canceled and the Stop mode is engaged.

Recording duration is especially important with timelapse recordings. If the duration is too short, date/time search will not function correctly. The recording duration must be equivalent to at least 5 seconds at Standard (2H) or EP (6H) speed : U model, (3H) speed : E mdel.

(Example) In the 960-hour normal timelapse mode, the recording time should be 40 minutes or more.

Date/time search setting screen

“Day” setting

“Time” setting

 

[MENU]

TD SRH 01D 00H

00H 00M 01S

–––––

–– : ––

Date/time search

A section recorded at a specified date and time is searched and the Stop1mode is engaged.

Press the [SEARCH] button three times in the Stop mode.

Alarm search setting screen [MENU]

Alarm search

A specified alarm recording is searched and the Stop mode

1is engaged.

Search data during tape

running (month, day,

hour, minute)

 

[The Date/Time Search mode is engaged and the date/time

 

search setting screen is shown on the monitor.

 

“td 0100” is shown on the VCR’s display.

 

* To cancel the Date/Time Search mode, press the [SEARCH]

2

button once.

ALARM SRH 01 00H00M01S

Control or reel counter

Alarm number (01- 99) To specify the alarm recording to be cued, enter the alarm number with respect to the current tape

Press the [SEARCH] button once in the Stop mode.

[The VCR enters the Alarm Search mode and the

alarm search setting screen is shown on the monitor.

The [AL01] indication blinks in the record/playback

speed mode indication section on the display.

* To cancel the Alarm Search mode, press the

VCR’s display

Press the [SET +] or [SET –] button to set the “date” you want to

3search (01 - 31).

 

 

4Press the [SHIFT f] button so that “hour” blinks.

 

5Press the [SET +/–] button to set the “hour” you want to search (00 - 23).

position in the forward or reverse direction.

2

[SEARCH] button three times.

 

Specify the alarm recording you want to search.

 

Press the [SET +] or [SET –] button to specify an alarm

 

number from 01 to 99.

 

The specified alarm number is shown on the monitor

“Day” setting

[MENU]

TD SRF 12D 19H

00H 00M 01S

“Hour” setting

Set value 19:00 on 12

Press the [FF] button or [REW] button.

[The VCR fast-forwards or rewinds the tape from the current position to search the specified date and time. When the recording is located, the Stop mode is engaged.

The Date/Time Search mode is canceled.

VCR’s display

and the VCR’s display. The alarm number is not

3absolute; it depends on the current tape position.

Press the [FF] or [REW] button.

[The VCR fast forwards or rewinds.

10 – 10 15:30

Search data during tape running (15:30 on Oct. 10)

During date/time search, the month, day, hour and minute which are being searched are shown on-screen.

If the specified date and time cannot be found and the tape ends, the Date/Time Search mode is canceled and the Stop mode is engaged.

Alarm number

When the start of the alarm recording with the

specified alarm number is located, search stops and

the Stop mode is engaged.

The Alarm Search mode is automatically canceled.

Notes:

If the specified date and time is near the start of an alarm recording, the date/time search may not be successful.

If the specified date/time is the same as the timer-recording start time, the VCR may not operate correctly.

Date/time search cannot be executed if no date and time are available in the search direction.

49

50

Page 30
Image 30
JVC SR-9080 appendix Alarm Search/Date and Time Search, Alarm scan, Date/time search, Alarm search