2 CONTROLS AND CONNECTORS |
| ||
U model |
|
|
|
|
|
|
|
1 | 6 | 7 | 8 |
|
|
| 2 | 3 |
|
|
1 Operation mode display |
|
| ||||
| Shows the operation modes. |
|
| |||
| Playback Recording | Rewind | Fast- | Timelapse | ||
| forward | playback | ||||
|
|
|
|
| ||
|
| Still | Record- | Rewind | Reverse | |
|
| pause | search | search | playback | |
|
|
| ||||
| * ( | ) mark in the Rec/Pause mode is shown in red. | ||||
2 |
| Cassette indication |
|
| ||
| Lights when a cassette is loaded. Blinks when a cassette | |||||
| is being ejected. |
|
|
| ||
3 | [SP/EP] indication |
|
|
| ||
| Shows the standard (SP) mode or extended (EP) mode | |||||
| during recording/playback. During ordinary timelapse | |||||
| recording/playback, the [SP] indication is shown. | |||||
| The [EP] indication is shown during recording in the HDR | |||||
| ||||||
| section recorded in the HDR mode. |
| ||||
4 Tape counter/clock indication |
|
| ||||
•Shows the current time (hour: minute: second), tape control counter (00H 00M 00S — 23H 59M 59S) or tape reel counter (0 — 9999) when the operating mode is on.
The display can be selected with the [DISPLAY] button. Shows the current time when the operating mode is off. When a cassette is ejected, the tape control counter and tape reel counter are reset automatically.
•When the cassette is rewound to the beginning in the Repeat Recording or Auto Rewind mode using the counter end output function, the tape control counter and tape reel counter are reset.
•The control and reel counter counts slowly in the Timelapse mode.
•In the timelapse mode, the control counter shows the time equivalent to that shown when a tape is played back in the 2H or 6H mode.
(Example: The control counter advances 1 second for about 8 minutes in the 960H ordinary timelapse mode.)
•During date/time search setting and operation, “td” is shown in place of the seconds.
•Shows the setting item during menu switch setting.
9
4
10 | 11 12 | 13 |
5 5 Recording/playback speed display
•Normally shows the recording/playback speed mode set with the [TIME MODE] button.
•Shows the following indications in the Alarm Search mode.
During alarm search: Shows the specified alarm number
(example: AL12)
During alarm scan: Shows the alarm scan mode (ALSC).
During date/time search: Shows the specified date and time (example 2310).
•Shows setting details in menu switch setting.
•When an error occurs, the error indication
For error indications, refer to page 53.
6 | [TIMER] indication |
| Lights during timer recording programming/operation. |
7 | [REPEAT] indication |
| When <REPEAT REC> in the <VTR MODE> menu is set |
| to “ON”, this indication is shown. When <TAPE END |
| MODE> in the <ALARM/SENSOR MODE> menu is set to |
| “STOP” and the Repeat Record mode is engaged, the |
| [REPEAT] indication goes out if alarm recording or sensor |
| recording takes place. |
8 | [OVERLAP] indication |
| Blinks when programs scheduled for timer recording overlap. |
9 Timer program number | |
| All programmed timer recording numbers light. |
| During timer recording, the number of the program being |
| recorded blinks. When the timer recording ends, this |
| number goes out. |
0 | [AL] (alarm) indication |
| Shown during alarm recording or sensor recording. |
| Blinks when alarm recording or sensor recording ends. |
! | [LOCK] indication |
| Lights when the operation lock function is activated. |
@ | [AL REC] (alarm recording) indication |
| Lights when the menu switch <REC MODE> on the <ALARM/ |
| SENSOR MODE> screen is set to “ALARM” or “ALL”. |
# | [SENSOR REC] (sensor recording) indication |
| Lights when the menu switch <REC MODE> on the <ALARM/ |
| SENSOR MODE> screen is set to “SENSOR” or “ALL”. |
2 CONTROLS AND CONNECTORS |
| |||
E model |
|
|
|
|
|
|
|
| |
1 | 6 | 7 | 8 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2 | 3 |
|
|
1 Operation mode display |
|
| ||||
| Shows the operation modes. |
|
| |||
| Playback Recording | Rewind | Fast- | Timelapse | ||
| forward | playback | ||||
|
|
|
|
| ||
|
| Still | Record- | Rewind | Reverse | |
|
| pause | search | search | playback | |
|
|
| ||||
| * ( | ) mark in the Rec/Pause mode is shown in red. | ||||
2 |
| Cassette indication |
|
| ||
| Lights when a cassette is loaded. Blinks when a cassette | |||||
| is being ejected. |
|
|
| ||
3 | [SP] indication |
|
|
| ||
| Shows the standard (SP) mode during recording/playback. | |||||
| During timelapse recording/playback, the [SP] indication is | |||||
| shown. |
|
|
|
| |
4 Tape counter/clock indication |
|
| ||||
•Shows the current time (hour: minute: second), tape control counter (00H 00M 00S — 23H 59M 59S) or tape reel counter (0 — 9999) when the operating mode is on. The display can be selected with the [DISPLAY] button. Shows the current time when the operating mode is off. When a cassette is ejected, the tape control counter and tape reel counter are reset automatically.
•When the cassette is rewound to the beginning in the Repeat Recording or Auto Rewind mode using the counter end output function, the tape control counter and tape reel counter are reset.
•The control and reel counter counts slowly in the Timelapse mode.
•In the timelapse mode, the control counter shows the time equivalent to that shown when a tape is played back in the 3H mode.
(Example: The control counter advances 1 second for about 5 minutes and 20 seconds in the 960H timelapse mode.)
•During date/time search setting and operation, “td” is shown in place of the seconds.
•Shows the setting item during menu switch setting.
9
4
10 | 11 12 | 13 |
5 5 Recording/playback speed display
•Normally shows the recording/playback speed mode set with the [TIME MODE] button.
•Shows the following indications in the Alarm Search mode.
During alarm search: Shows the specified alarm number
(example: AL12)
During alarm scan: Shows the alarm scan mode (ALSC).
During date/time search: Shows the specified date and time (example 2310).
•Shows setting details in menu switch setting.
•When an error occurs, the error indication
For error indications, refer to page 53.
*Tapes recorded in the LP mode cannot be played back. In this case, the [LP] indication blinks in this section.
6 | [TIMER] indication |
| Lights during timer recording programming/operation. |
7 | [REPEAT] indication |
| When <REPEAT REC> in the <VTR MODE> menu is set to |
| “ON”, this indication is shown. When <TAPE END MODE> in |
| the <ALARM/SENSOR MODE> menu is set to “STOP” and |
| theRepeatRecordmodeisengaged,the[REPEAT]indication |
| goes out if alarm recording or sensor recording takes place. |
8 | [OVERLAP] indication |
| Blinks when programs scheduled for timer recording overlap. |
9 Timer program number | |
| All programmed timer recording numbers light. |
| During timer recording, the number of the program being |
| recorded blinks. When the timer recording ends, this number |
| goes out. |
0 | [AL] (alarm) indication |
| Shown during alarm recording or sensor recording. |
| Blinks when alarm recording or sensor recording ends. |
! | [LOCK] indication |
| Lights when the operation lock function is activated. |
@ | [AL REC] (alarm recording) indication |
| Lights when the menu switch <REC MODE> on the <ALARM/ |
| SENSOR MODE> screen is set to “ALARM” or “ALL”. |
# | [SENSOR REC] (sensor recording) indication |
| Lights when the menu switch <REC MODE> on the <ALARM/ |
| SENSOR MODE> screen is set to “SENSOR” or “ALL”. |
11 (U) | (E)11 (E)11 |
