JVC SR-DVM700E manual Setting The Progressive Mode, Programme Playback, Random Playback

28 EN BASIC OPERATIONS ON DVD DECK

Setting The Progressive Mode					4 Press I. Playback starts in the programmed order.
					● When all of the programmed tracks have been played back,
					Programme Playback stops, but the programmed information
					remains.
					● To add tracks to the end of the programme, perform step 3.
You can obtain optimal picture quality by selecting whether the
					● During Programme Playback, pressing T skips to the next
content on the disc is processed by field (video source) or by frame					selection of the programme. Pressing S returns to the
(film source).					beginning of the current selection.
1 Set the unit to the progressive scan mode. (A pg. 63)					To clear the on-screen bar and the contents of the programme
2 Press ON SCREEN twice to access the on-screen bar.					Press ON SCREEN.
3 Press selection keys to select A				B, then press ENTER. The	To cancel Programme Playback
pop-up window appears under the selected item.					Press selection keys to select APRGMB, then press ENTER.
	TITLE 99	CHAPTER 99	EACH 0:00		NOTE:
					Programme Playback is not possible depending on the type of disc.

DVD-	3D-ON CINEMA AUTO
VIDEO

4Press selection keys to select the desired option, then press

ENTER.

AUTO:

This mode automatically detects film and video content for progressive playback. When film content is found, flag detection is used to invoke playback of film data in full screen. When video content is found, pictures from multiple fields are used to detect sections with movement, and then this movement undergoes advanced image processing for output of sharp, detailed progressive images without any reduction in image quality where movement occurs. Normally, operation in this mode is recommended.

FILM:

Suitable for playing back a progressive scanned film source disc.

VIDEO:

Suitable for playing back a video source disc. The outlines on the played back pictures will be soft.

To clear the on-screen bar

Press ON SCREEN.

NOTE:

Progressive scan is output only from [COMPONENT VIDEO OUT] connectors.

Programme Playback

You can programme up to 30 tracks (Video CD/SVCD or Audio CD) to play back in the desired order.

Random Playback

You can play back all the tracks on the disc in random order.

While stopped

1Press ON SCREEN twice to access the on-screen bar.

2Press selection keys to select ARNDB, then press ENTER. Playback starts in random order.

TRACK 99 EACH 0:00

CINEMA

VCD

To clear the on-screen bar

Press ON SCREEN.

To cancel Random Playback

Perform steps 1 and 2.

NOTE:

The same track will not be played back more than once during Random Playback.

Select The Switching Interval Of The Slide Show

You can control the switching interval of the slide show.

1Press ON SCREEN twice to access the on-screen bar.

2Press selection keys to select AB, then press ENTER. The pop-up window appears under the selected item.

GROUP 99 TRACK 99

While stopped

1Press ON SCREEN twice to access the on-screen bar.

2Press selection keys to select APRGMB, then press ENTER. The programme table appears under on-screen bar.

TRACK 99	EACH 0:00
VCD	CINEMA
3 Press the number keys to	USE [0-9] KEYS TO SELECT TRACK

enter the track numbers in the desired order.

Examples:

A To select track 5, press the

number key A5B and ENTER.

B To select track 15, press the	PROGRAMME TOTAL TIME
number key A1B and A5B.

CTo select track 25, press the number key A2B and A5B.

If you have specified a wrong selection

Press CANCEL. The last selection is erased.

Or press CLEAR (o). The whole selection is erased.

5 sec

JPEG

3Press selection keys to select the desired option, then press

ENTER.

●Each time you press the selection keys, the interval changes as follows:

5 sec Y 10 sec Y 15 sec Y 20 sec Y 25 sec Y 30 sec Y (Back to the beginning)

To clear the on-screen bar

Press ON SCREEN.

NOTE:

JPEG files are played back as a slide show. It may take more time to display an image with larger file size.