25
Item
BLC
W. BALANCE
R-B GAIN
M-G GAIN
Initial Value
OFF
ATW
95
63
FACTORY SETTINGS screen
This screen resets values to their factory settings.
Item
FACTORY
SETTINGS
Initial Value
Function & Setting
Resets all settings in the above menus to their initial factory settings. Pressing the
SET button displays “EXECUTING” (2 sec. approx.) and resets the settings to the
factory settings.
CANCEL :Does not alter current values.
CLEAR (W/O POS. TITLE) :Resets the settings to the initial, factory settings.
However, the set positions, the setting data of each
position and the titles are not reset to the factory set-
tings.
CLEAR (ALL) :
Resets all settings including titles and stored positions.
Function & Setting
Sets of area of back light compensation. Use this function when the object appears
dark (under auto iris control) because of the presence of a bright light source be-
hind it. This function make it possible to place the unnecessary light source outside
the photometry area.
OFF :The backlight compensation function does not work.
ARER 1 to AREA 4 :When the SET button is pressed, the fixed light metering ar-
eas are displayed.
Select one of the four types.
Pushing the MENU button returns the screen to POSITION
FUNCTION SET.
Determines the setting of the white balance adjustment. The white balance can be
adjusted for lighting conditions with colour temperatures from 2500K to 8000K.
ATW :Auto-Tracking White balance mode, adjusts the white balance automati-
cally according to the colour temperature of the lighting conditions.
When ATW is set, “---“ is displayed for the items “R-B GAIN” and “M-G
GAIN”, so that the colour phase adjustment cannot be carried out.
AWC :Auto White Control mode, which displays “PUSH SET ADJ. STRAT”.
When the SET button is pressed, AWC is activated and the white balance
adjustment starts.
If the AWC is activated while the screen is B&W the LOW LIGHT ERROR
will be displayed. This is not abnormal.
Adjusts the phases of R (Red) and B (Blue) under AWC mode.
To enhance blue:Decrease the value.
To enhance red :Increase the value.
Setting values: 0 to 255
Adjusts the phases of M (Magenta) and G (Green) under AWC mode.
To enhance green : Decrease the value.
To enhance magenta : Increase the value.
Setting values: 0 to 255
OFF AREA 1 AREA 2 AREA 3 AREA 4
Photometry area
Photometry area
Photometry area
Photometry area
Photometry area
When the item “ExDR MODE” ( page 23) is set to ON, the item “BLC” is set to OFF and
“---” is displayed. Under this condition, the settings to the item “BLC” cannot be varied.
MEMO
POSITION FUNCTION SET Screen (Continued)