7
)
⁄
(
*
^
&
(Setting switch side)
$
%
#
#
@
!
!Camera Connector (Female)
Connect to ^, the Male Connector on the camera.
@Drop Prevention Hook
Attach the Drop Prevention Wire & to this hook to prevent
the camera from falling.
#Clamping Holes (x 4)
Attach the camera to a ceiling or to a Flush Mounted Ceil-
ing Bracket (optionally available) using these holes.
$[MACHINE ID] Switch
When an RS-485 communication system is used, for ex-
ample when using the camera in a system controlled by
an RM-P2580, set the camera IDs individually for each
camera.
☞ P. 1 3
%Setting Switches
Use these to set the PROTOCOL, etc.
☞ P. 1 2
^Connector (Male)
Connect to !,the Female Camera Connector on the
Ceiling Mount.
&Drop Prevention Wire
Attach this wire to the Drop Prevention Hook @ on the
Ceiling Mount.
*Camera Clamping Bracket
In order to clamp the camera onto the Ceiling Mount, in-
sert and tighten the Locking Screw 4 into this bracket.
(Lens
The lens is not a replaceable item.
)Dome Cover
The dome cover is fragile. Take care when handling it.
⁄Camera Body Cover
Do not remove the camera body cover while the camera is
installed on a ceiling. Doing so will cause the dome cover
to fall down.
Ceiling Mount Camera