1 | 2 | G 2 | 1 2 | 1 | |
| AC24V | INPUT |
| OUTPUT | |
CLASS2 ONLY FOR USA ISOLATEDPOWER ONLY FOREUROPE AND OTHER | ALARM | S | |||
| |||||
OUT | PoE |
|
| ||
| MONITOR |
|
|
| |
|
|
|
| ||
SEE INSTRUCTION MANUAL |
|
| |||
CAUTION: NEVER USE PoE AND AC 24V AT THE SAME TIME | PUSH | ||||
DO NOT CONNECT TO THE TELEPHONE NETWORK |
| ||||
O P
O [MONITOR OUT] Monitor Video Signal Output Terminal (RCA)
This is an output terminal for composite video signals (1 V
This terminal is used for adjusting the camera angle during installation. (A Page 19)
Note:
●Use the K [MONITOR OUT] switch to select the availability of output as well as the signal system. When the switch is changed, press the L Reset button to reboot the unit.
●When using the [MONITOR OUT] output, set the privacy mask to AOffB. (A Page 56)
Use this terminal to connect to the network via a LAN cable.
This product supports PoE (IEEE802.3af) and therefore can be used without a power cable. PoE: class 2
class 0
Q [ALARM INPUT/OUTPUT] Alarm Input/ Output Terminals
Use these terminals to connect to an external alarm device.
R [AC24V] Power Input Terminal
Use this terminal to connect to an AC 24 V, 50/60 Hz power supply.
1 | 2 |
| G 2 | 1 2 | 1 |
|
| AC24V | INPUT | ALARM |
| OUTPUT | |
CLASS2 ONLY FOR USA ISOLATEDPOWER ONLY FOREUROPE AND OTHER |
|
| S | |||
| PoE |
| ||||
OUT |
| AUDIO OUT |
| |||
| MONITOR |
|
|
|
| T |
|
|
|
|
| ||
SEE INSTRUCTION MANUAL |
|
|
| |||
CAUTION: NEVER USE PoE AND AC 24V AT THE SAME TIME | PUSH | |||||
DO NOT CONNECT TO THE TELEPHONE NETWORK |
|
| ||||
O P
S Fall Prevention Wire Mounting Screw (M3 x 6 mm)
Use this screw to mount the fall prevention wire. (A Page 21)
T[AUDIO OUT] Audio signal output terminal
(mini jack R3.5 mono)
Outputs audio (analog) received from a computer.
Does not output audio from the F
12