A Camera ID

Character strings entered here will be written to the JPEG comment segment

 

 

(item name: camera). Refer to the API Guide on the file formats of JPEG.

 

 

 

 

B Monitor Type

For selecting the monitor type according to the monitor used to display the

 

 

video images. The picture quality varies according to the type of monitor

 

 

selected.

 

 

 

Custom

 

: Enables setting of picture quality according to the user’s

 

 

 

 

 

preference.

 

 

LCD1, LCD2

: Picture quality setting for LCD monitors. Two types are

 

 

 

 

 

available for selection according to the user’s preference.

 

 

CRT

 

: Picture quality setting for CRT (cathode-ray tube) monitors.

 

 

[Set values: Custom, LCD1, LCD2, CRT]

 

 

 

 

C Black Level

For adjusting the black level. Lowering the value darkens the video image.

 

 

Increasing the value brightens the image.

 

 

[Setting range: 0 ~ 2]

 

 

Note:

 

 

 

 

 

 

 

 

 

 

● If the black level is set to “0”, this may be too low depending on the

 

 

monitoring device, or dark area will become complete black.

 

 

● When using MPEG4 images, set to either “1” or “2”.

 

 

 

 

D Gamma

To alter the appearance of dark areas in a video image, adjust the gamma

 

 

curve.

 

 

 

 

Off

: Do not perform gamma correction. The entire image appears

 

 

 

 

dull.

 

 

-3 ~ 3

 

: Perform gamma correction. When this is set to “0”, standard

 

 

 

 

gamma correction is performed. Setting to a smaller value

 

 

 

 

darkens the image, while increasing the value brightens the

 

 

 

 

image.

 

 

[Set values: Off, -3 ~ 0 ~ 3]

 

 

Note:

 

 

 

 

 

 

 

 

 

 

● The set value is fixed when the monitor type is set to ALCD1B, ALCD2B, or

 

 

ACRTB.

 

 

 

 

 

E Enhance

For setting the type of edge enhancement.

 

Frequency

Low

: Enhances both thick and thin edges.

 

 

High

: Enhances thin edges.

 

 

[Set values: Low, High]

 

 

Note:

 

 

 

 

 

 

 

 

 

 

● The set value is fixed when the monitor type is set to ALCD1B, ALCD2B, or

 

 

ACRTB.

 

 

 

 

 

F Enhance Level

For setting the intensity of edge enhancement.

 

 

Larger value

: Increases the intensity of edge enhancement.

 

 

Smaller value

: Decreases the intensity of edge enhancement.

 

 

[Setting values: -5 ~ 0 ~ 5]

 

 

 

 

G Color Level

For adjusting the color level.

 

 

Larger value

: Increases the color level.

 

 

Smaller value

: Decreases the color level.

 

 

[Setting values: -5 ~ 0 ~ 5]

 

 

 

 

 

 

 

39