Connection / Installation

●In a system where multiple units of VN-V25U/ 26U are used, turn on the power of only one unit to configure the IP address settings using the Internet Explorer. Upon doing so, turn on the power of the second unit and configure accordingly. Configure the camera settings using the same procedure.

●When overlapping of the IP address occurs, check to ensure that there is only one VN-V25U/26Uunit within the same LAN environment, and wait for a while (at least 10 minutes) or power off and on all network devices under the same LAN environment. Otherwise, access to VN-V25U/26Umay fail.

Using the PoE

Connect to a device that supports PoE to supply electricity from the LAN cable.

1

2

G

 

 

INPUT

CLASS2 ONLY FOR USA ISOLATEDPOWER ONLY FOREUROPE AND OTHER

AC24V

 

OUT

PoE

 

MONITOR

 

SEE INSTRUCTION MANUAL

CAUTION: NEVER USE PoE AND AC 24V DO NOT CONNECT TO THE TELEPHONE

2

1

2

1

OUTPUT

ALARM

-T/ -TX

THE SAME TIME

PUSH

Connect to PoE- compatible device

Note:

●For details on the connection method and cable type, please refer to ALAN Cable ConnectionB (A Page 19).

What is PoE (Power over Ethernet)?

This is a function that enables operation of a LAN equipment without a power cable by supplying power simultaneously with the data using a LAN cable.

18