JVC VN-V25U VN-V26U Note:, Alarm Page (continued)

Setting Using Internet Explorer

Setting (continued)

Alarm Page (continued)

A Action	For specifying the type of action.
	Disable	: Does not trigger any action.
	Mail	: Sends out e-mail. Specify the recipient’s mail address.
		The title of the mail will appear as [Alarm from VN-V2x]
		and the sender as [Camera ID]. Enter the message to send
		in	[Mail Text]. Input up to 127 alphanumeric characters.
		To attach the latest image to the mail, set [Attach Image] to
		AOnB.
	FTP	: Sends out pre-/post-recorded JPEG files via FTP. See the
		page on Alarm Environment for details on pre-/post-
		recording and FTP server settings. (A Page 52)
		The maximum transmission rate of FTP is 1 Mbps. If a new
		FTP trigger occurs during post-recording, the recorded
		portion is treated as pre-recording and a new post-
		recording starts. During FTP transmission after completing
		the post-recording, a new post-recording starts if a new
		FTP trigger occurs.
	TCP	: Sends out the character string entered in the [TCP/UDP
		Data] field to the destinations specified in [TCP/UDP IP
		Address] and [TCP/UDP Port Number] via TCP.
	UDP	: Sends out the character string entered in the [TCP/UDP
		Data] field to the destinations specified in [TCP/UDP IP
		Address] and [TCP/UDP Port Number] via UDP.
	TCP/UDP Data	: Input up to 127 alphanumeric characters.
	Output 1 Make	: Changes Alarm Output 1 to Make.
	Output 2 Make	: Changes Alarm Output 2 to Make.
	Output 1 Break	: Changes Alarm Output 1 to Break.
	Output 2 Break	: Changes Alarm Output 2 to Break.
		Set the alarm output time in the [Alarm Output Duration]
		field.
	 For VN-V26U,you can specify the following items in addition to the above.
	BlackWhite B Color		: Changes the setting in [B&W Mode] from
			ABlack&WhiteB to AColorB.
	Color B BlackWhite		: Changes the setting in [B&W Mode] from AColorB
			to ABlack&WhiteB.
	Auto Low		: Changes the [B&W Mode] setting to AAuto LowB.
	Auto Mid		: Changes the [B&W Mode] setting to AAuto MidB.
	Auto High		: Changes the [B&W Mode] setting to AAuto HighB.

Note:

●For details on [B&W Mode], see [B&W Mode]. (A Page 41)

48