B FTP

Time Filter:

 

 

 

 

For specifying the periodic FTP transfer action with respect to each day of

 

 

the week and setting the corresponding time of the day.

 

 

Applicable day of week : Sunday, Monday, Tuesday, Wednesday,

 

 

 

Thursday, Friday, Saturday

 

 

Alarm action

 

 

 

 

Unmask Span

: For specifying the time period for invoking the

 

 

 

action

 

 

 

Mask Span

: For specifying the time period to stop the action

 

 

Unmask All

: Activated at all times

 

 

Mask All

: Stopped at all times

 

 

Applicable time period

: For specifying the start and end time in hours and

 

 

 

minutes.

 

 

 

Pre-/Post-recording parameter:

 

 

 

[PrePostRecording Frame Rate]

: For specifying the JPEG frame rate for

 

 

 

 

FTP pre-/post-recording.

 

 

[PrePostRecording Before Trigger] : For setting the FTP pre-recording

 

 

 

 

trigger time (recording time before

 

 

 

 

alarm input) in seconds.

 

 

 

 

[Setting range: 0 ~ 60 seconds]

 

 

[PrePostRecording After Trigger]

: For setting the FTP post-recording

 

 

 

 

trigger time (recording time after alarm

 

 

 

 

input) in seconds.

 

 

 

 

[Setting range: 0 ~ 60 seconds]

 

 

The maximum time intervals for [PrePostRecording Before Trigger] and

 

 

[PrePostRecording After Trigger] are determined by the JPEG size on the

 

 

Encoding page as well as [PrePostRecording Frame Rate]. A message

 

 

appears if the combination of the entered values are not feasible.

 

 

 

C Alarm Output

For setting the alarm output.

 

 

 

 

 

Duration

For setting the output time of [Manual Output].

 

 

[Setting range: 0/100 msec ~ 5000 msec]

 

 

 

 

Manual

For operating alarm output manually.

 

Output

The current output status appears on the right. When [Duration] is set to “0”,

 

 

pressing the [Make] button switches the alarm to Make output, while

 

 

pressing the [Break] button switches the alarm to Break output.

 

 

When [Duration] is set to a value other than “0”, pressing the [Make] button

 

 

switches the alarm to Make output only during the duration of the output,

 

 

upon which it switches to Break output.

 

 

When the output duration is set to a value other than “0”, pressing the

 

 

[Break] button switches the alarm to Break output only during the duration of

 

 

the output, upon which it switches to Make output.

 

 

 

 

 

55