Setting Using Internet Explorer

Setting (continued)

Encoding Page

This page is for setting JPEG and MPEG4 encoding parameters.

This page can be used during access using AadminB or AoperatorB.

●Press the [OK] button to enable the new settings.

●If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.

●When settings on this page are altered during playback using the built-in viewer, reboot the viewer.

●There is a maximum limit to the bit rate for transmission by VN-V25U/26U.If a bit rate that exceeds the maximum limit is specified, this new setting will not be applied. For details on the maximum transmission limit, refer to the section on ANetwork RequirementsB (A Page 24).

A

B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

D

E

F

G

 

 

 

 

 

 

 

 

 

 

 

 

 

A Frame Size

For setting the frame size of each JPEG or MPEG4 screen to VGA (640 x

 

480) or QVGA (320 x 240).

 

 

 

 

 

 

 

 

Select one of the four different patterns.

 

 

 

 

 

When the frame size of JPEG is the same as MPEG4, the privacy mask can be displayed on both images. When the frame size of JPEG is different from MPEG4, privacy mask can only be displayed on QVGA images. (A Page 56)

44