Setting Using Internet Explorer

Setting (continued)

Details Page

This page is for performing detailed network setting.

This page can be used during access using AadminB.

●Press the [OK] button to enable the new settings.

●If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.

The model illustrated in the diagram is VN-V26U.

A

B

C

D

E

F

G

A JPEG TOS(DS field)

For setting the TOS value of IP packets in which JPEG is stored.

 

The upper six bits out of the eight bits that make up the TOS value belong to DSCP.

 

This upper six bits can be set. The lower two bits are “0”. For example,

 

upon setting to “255”, the lower two bits are converted to “0”, and the

 

value becomes “252”.

 

TOS values are used in networks that support QoS. By setting QoS for

 

the network switch, routing can be done by giving priority to packets with

 

a larger TOS value.

 

 

B MPEG4 TOS(DS field)

For setting the TOS value of IP packets in which MPEG4 is stored.

 

For details, refer to the [JPEG TOS(DS field)] item above.

 

 

C Audio TOS(DS field)

For setting the TOS value of IP packets in which Audio is stored.

(VN-V26Uonly)

For details, refer to the [JPEG TOS(DS field)] item above.

 

 

D TTL Unicast

For setting the TTL value of JPEG/MPEG4 packets that are to be sent via

 

TCP.

 

 

E TTL Multicast

For setting the TTL value of JPEG/MPEG4 packets that are to be sent

 

via multicast.

 

 

F MTU

For setting the maximum packet size for storing JPEG/MPEG4.

 

[Setting range: 1280 ~ 1500]

 

 

G Negotiation

For setting the negotiation of the network.

 

When a value other than AAutoB is selected, do not set the network

 

device to be connected to AAutoB. Ensure that it is set to the same value

 

as VN-V25U/26U.

 

 

62