Operation

Operation of Built-in Viewer (continued)

JPEG Viewer Configuration (continued)

 

Multicast IP

You can change the multicast IP address.

 

Address

The default IP address setting is 225.0.1.1.

 

 

 

 

Multicast Port

You can change the multicast port number.

 

 

The default port number setting is 49152.

 

 

This is enabled when AStartB is selected for the [JPEG Control] item on

 

 

the [Streaming] page.

 

 

Specify the same value as the parameter that is set on the [Streaming]

 

 

page of VN-V25U/26U. (A Page 65)

 

 

 

C Folder Name

For specifying the name of the folder in which the captured files are

 

 

stored. (When the viewer is installed: The folder names for VN-V25Uand

 

 

VN-V26Uare VN-V25and VN-V26respectively.)

 

 

D OK

Saves the changed settings.

 

 

Click the [OK] button to enable the new settings and restart the built-in

 

 

viewer after closing the setting window.

 

 

E Cancel

Cancels the changed settings and closes the setting screen.

 

 

 

Note:

●The settings of the built-in viewer are stored in the file named Cookie.

This setting screen is used to set the built-in viewer as a software on the computer, and does not apply to settings of the VN-V25U/ 26U unit.

When settings are changed, press the [OK] button to exit and restart the viewer.

Note:

Searching and deleting cookie files

●Open [Tool]-[InternetOptions]-[Advanced]of the Internet Explorer, and press the [Settings] button under [Temporary Internet Files]. A new [Settings] will appear. Press the [View Files] button in this window. The [Temporary Internet Files] window opens up and a list of files will be displayed. The file named Acgi-binBin this list is the Cookie for the built-in viewer.

●Deleting this file deletes the view settings, and the viewer will be initialized during the next startup.

86