Operation
Operation of Built-in Viewer (continued)Internet Explorer Setup (continued)3.If ActiveX controls and plug-insof the Internet Explorer is disabled, follow the steps below to enable it
●Click [Trusted sites] under [Tool]-[InternetOptions]-[Security].Upon doing so, the [Sites…] button directly below becomes active. Click this button and deselect the check in the displayed window. Next, add the IP address of VN-V25U/26U.If the setting is factory default, add the following web site to the zone.
http://192.168.0.2
●Click [Trusted sites] under [Tool]-[InternetOptions]-[Security].Select the [Custom Level] button and open the [Security Settings] window. Set all items under [ActiveX controls and plug-ins]in the opened window to [Enable]. Enable also [Allow Script-initiated window without size or position constraints.] under [Miscellaneous].
4.If the pop-up block function of the Internet Explorer is enabled, follow the steps below to disable it
T The built-in viewer cannot be used when the pop-up block function is enabled.
●Selecting [Tool]-[Pop-upBlocker]-[Turn Off Pop-up Blocker] permits all sites.
●To allow only specific sites such as VN-V25U/26U,select [Tool]-[Pop-upBlocker]-[Turn On Pop- up Blocker], followed by selecting [Tool]-[Pop-upBlocker]-[Pop-up Blocker Settings] that becomes active to open the [Pop-up Blocker Settings] window. In the opened window, add the address of VN-V25U/26Uas a permitted web site address.
5.When plug-in tools such as the Yahoo or Google toolbar are included in the Internet Explorer, disable the pop-up block function of these plug-in tools as well
Note:
●To use the built-in MPEG4 Viewer of VN-V25U/26U,install “ffdshow” that is open source codec. You can download “ffdshow” from the Internet.