Changing the initial settings
To set the delay time
You can adjust the delay time of each speaker. Selecting each speaker distance, which is on the basis of the distance between the front speakers and the listening position, sets an appropriate delay time. Check that what the distance to each speaker is and set distance values following the procedure.
| TV | DVD | |
OPEN/ | STANDBY/ON | ||
TV | DVD | ||
CLOSE | |||
| TV1 | TV2 | TV3 |
|
| 1 | 2 | 3 |
|
| TV4 | TV5 | TV6 |
|
| 4 | 5 | 6 |
|
| TV7 | TV8 | TV9 |
|
| 7 | 8 | 9 |
|
| TV0 | MUTING |
| |
| 10 | 0 | +10 |
|
|
| TITLE/ | TV/VIDEO |
|
| RETURN | PAGE GROUP | CANCEL |
|
| U |
| M | 5/∞ |
| EN | CH | ||
| M | EN | ||
| P | + | U | |
T | O |
|
| |
VOL- |
| VOL+ |
ENTER 
ENTER 
C | CH |
| EN |
H |
| ||
OI | - |
| RE |
CE |
|
| SC |
|
|
| ON |
PREVIOUS |
| NEXT | |
CLEAR | SELECT | STROBE | |
SLOW- |
|
| SLOW+ |
REPEAT SUB TITLE | AUDIO | VFP | |
|
| fs/Rate | PROGRESSIVE |
DIGEST | ANGLE |
| SCAN |
ZOOM | |||
3D | PAL/ | AMP VOL | |
PHONIC | NTSC | ||
REMOTE CONTROL
¶While the [SPK.SETTING] page of the preference display is shown
1 Use 5/∞ to move 
to [DELAY] and press
ENTER.
The DELAY display page appears on the TV screen.
points to [CENTER SPEAKER].
See page 61 for details about how to bring up the [SPK.SETTING] page.
DELAY |
|
|
| CENTER SPEAKER | 0.0m |
| REAR SPEAKER | 1.5m |
| RETURN |
|
SELECT | USE 5∞23 TO SELECT, USE ENTER TO CONFIRM | |
ENTER | TO EXIT, PRESS CHOICE. |
|
Changingthe | settingsinitial | 2 Use 5/∞ to select the speaker to be set and | |
press ENTER. |
| ||
|
|
| |
|
| CENTER SPEAKER: Center speaker | |
|
| REAR SPEAKER: | Rear speakers |
3 Use 5/∞ to select the delay time and press
ENTER.
When you select [CENTER SPEAKER], you can select the delay time from [0.0m] to [1.5m] in 30cm units.
When you select [REAR SPEAKER], you can select the delay time from [0.0m] to [4.5m] in 30cm units.
4 Repeat steps 2 and 3 if you set other speakers.
• To return to the [SPK.SETTING] page
Use 5/∞ to move 
to [RETURN] and press ENTER.
NOTE
• For the speaker(s) whose size is set to [NONE], the delay time cannot be set.
To set the speaker level
You can adjust the output level of each speaker.
| TV | DVD | |
OPEN/ | STANDBY/ON | ||
TV | DVD | ||
CLOSE | |||
| TV1 | TV2 | TV3 |
|
| 1 | 2 | 3 |
|
| TV4 | TV5 | TV6 |
|
| 4 | 5 | 6 |
|
| TV7 | TV8 | TV9 |
|
| 7 | 8 | 9 |
|
| TV0 | MUTING |
| |
| 10 | 0 | +10 |
|
|
| TITLE/ | TV/VIDEO |
|
| RETURN | PAGE GROUP | CANCEL |
|
| U |
| M | 5/∞ |
| EN | CH | ||
| M | EN | ||
| P | + | U | |
T | O |
|
| |
VOL- |
| VOL+ |
ENTER 
ENTER 
C | CH |
| EN |
H |
| ||
OI | - |
| RE |
CE |
|
| SC |
|
|
| ON |
PREVIOUS |
| NEXT | |
CLEAR | SELECT | STROBE | |
SLOW- |
|
| SLOW+ |
REPEAT SUB TITLE | AUDIO | VFP | |
|
| fs/Rate | PROGRESSIVE |
DIGEST | ANGLE |
| SCAN |
ZOOM | |||
3D | PAL/ | AMP VOL | |
PHONIC | NTSC | ||
REMOTE CONTROL
¶While the [SPK.SETTING] page of the preference display is shown
1 Use 5/∞ to move 
to [LEVEL] and press
ENTER.
The LEVEL display page appears on the TV screen.
points to [CENTER SPEAKER].
See page 61 for details about how to bring up the [SPK.SETTING] page.
LEVEL |
|
|
| FRONT SPEAKER | 0dB |
| CENTER SPEAKER | 0dB |
| REAR SPEAKER | 0dB |
| SUB WOOFER | 0dB |
| TEST TONE | OFF |
| RETURN |
|
SELECT | USE 5∞23 TO SELECT, USE ENTER TO CONFIRM | |
ENTER | TO EXIT, PRESS CHOICE. |
|
2 Use 5/∞ to select the speaker to be set and press ENTER.
FRONT SPEAKER: | Front speakers (This item |
| cannot be selected. The level |
| is fixed to 0dB.) |
CENTER SPEAKER: Center speaker | |
REAR SPEAKER: | Rear speakers |
SUB WOOFER: | Subwoofer speaker |
3 Use 5/∞ to set the level and press ENTER.
When you select [CENTER SPEAKER], [REAR SPEAKER] or [SUB WOOFER], you can select the level from
4 Repeat steps 2 and 3 if you set other speakers.
• To return to the [SPK.SETTING] page
Use 5/∞ to move 
to [RETURN] and press ENTER.
NOTE
• For the speaker(s) whose size is set to [NONE], the speaker level cannot be set.
64
