8 Use 5/∞ to select a desired digital output signal type.
You must set this item correctly when you connect the unit to an external surround decoder or D/A convertor (including an amplifier/receiver with
(If you do not connect the unit to such a device, you do not have to set this item.)
•When connecting with a Dolby Digital decoder, select [DOLBY DIGITAL/PCM].
•When connecting with a DTS or MPEG Multichannel decoder, select [STREAM/PCM].
•When connecting with other digital devices, select [PCM ONLY].
9 Press ENTER.
The TV screen returns to show the opening display.
NOTES
•This setting may not be necessary except when turning on the power after purchasing the unit.
•You can also set these items, as well as other preferences, by pressing CHOICE briefly to bring up the preference display. See "Changing the initial settings" on and after page 57 for details.
Basic operations
Basic operations
17
