Basic operations
5 Press ENTER.
The third page is shown, in which the | Basic playback |
[DIGITAL AUDIO OUTPUT] is already open. |
|
PCM ONLY | 1 |
|
DOLBY DIGITAL/PCM | Press 0 (or OPEN/CLOSE on the remote | |
STREAM/PCM | ||
|
| control unit) to open the disc tray. |
| 2 Place a disc in the disc tray. | |
DIGITAL AUDIO OUTPUT options
6 Press 5/∞ to select a desired digital output signal type.
Set this item correctly when you connect the player to an external surround decoder or D/A converter. See “DIGITAL AUDIO OUTPUT” on page 30. (If you do not connect the player to such a device, you do not have to set this item.)
•When connecting to other digital device, select [PCM ONLY].
•When connecting to a Dolby Digital decoder, select [DOLBY DIGITAL/PCM].
•When connecting to a Dolby Digital decoder/DTS decoder/ MPEG decoder, select [STREAM/PCM].
7 Press ENTER.
The TV screen returns to the opening display.
To bring up the DVD PLAYER SET UP display later
Press SET UP for a few seconds until the DVD PLAYER SET UP display appears.
With the label side up
•To insert an
3 Press 0 (or OPEN/CLOSE on the remote control unit) to close the disc tray.
4 Press 3 on the player or 3/SELECT on the remote control unit.
The player starts playback from the beginning.
•Depending on the disc, playback starts when you close the disc tray.
If a menu is shown on the TV screen
When inserting a DVD VIDEO, SVCD or Video CD disc, a menu may be shown on the TV screen. From the menu, you can select a desired item to be played back.
For DVD VIDEO
1Press 5/∞/2/3 to select a desired item.
2Press ENTER.
The player starts playback of the selected item.
For SVCD/Video CD
Press the numeric buttons to select a desired item. The player starts playback of the selected item.
NOTES
•Do not insert an unplayable disc. (See page 2.)
•When inserting a disc on the disc tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the disc tray is closed, or you may not be able to remove the disc from the player.
•If it takes time to read the loaded disc (“READING” appears on the display window), remove the disc by pressing OPEN/ CLOSE on the remote control and check the disc.
Basic operations
11
