Preparations
8
XV-NP10S/LET0246-001A/English
Preparations

Connecting the power cord

When all the audio/video connections have been made, connect
the AC power plug to the wall outlet. Make sure that the plugs are
inserted firmly.
The STANDBY/ON indicator lights in red.
NOTE
(ONLY for PX model)
Use the supplied AC power plug adaptor when inserting the larger
plug to the wall outlet.
Warning
•Disconnect the power cord:
- if you are not going to use the player for a long time.
- before cleaning the player.
- before moving the player.
•Do not:
- connect or disconnect the power cord with wet hands.
- pull the power cord when disconnecting it, as this may damage
the cord and cause fire, electric shock, or other accidents.
Caution
•Do not alter, twist or pull the power cord, or put anything heavy
on it, which may cause fire, electric shock, or other accidents.
•If the cord is damaged, consult a dealer and have the power cord
replaced with a new one.
Using the remote control unit

To install batteries

Open the compartment cover, and place the two supplied R6
(SUM-3)/AA(15F) batteries in the remote control unit according to
the polarity markings (“+” and “–”) inside the compartment. Then
replace the cover.
The batteries will last about six months with normal use.
If the functions of the remote control unit become erratic, replace
the batteries.

Precautions of the safe use of batteries

Observe the following precautions for the safe use of batteries. If
they are used improperly their lives will be shortened, they may
burst or their contents may leak.
•Remove the batteries from the remote control unit if it is not
going to be used for a long period of time.
•Remove dead batteries and dispose of them properly.
•Never leave dead batteries lying around, take them apart, mix
them with other refuse, or throw them into an incinerator.
•Never touch liquid that has leaked out of a battery.
•Do not mix new and old batteries, or batteries of different types,
when replacing them.

Remote sensor

Point the top of the remote control unit toward the remote sensor
as directly as possible. If you operate it from a diagonal position,
the operating range (approx. 5 m) may be shorter.
Remote sensor
XV-NP10[J_UJ].book Page 8 Monday, April 19, 2004 9:57 PM