Basic operations

 

 

 

To resume playback

 

 

 

Various speed playback

When the resume mode is “ON”

 

 

While the disc you interrupted playback is still on the disc tray, press 3/SELECT.

The player resumes playback from the position where playback was interrupted. The TV screen shows “RESUME PLAY.”

To play back from the beginning

Press 7 before pressing 3/SELECT to start playback.

When the resume mode is “DISC RESUME”

1 Press 0 to insert a disc for which the player has stored an interrupted position.

The TV screen shows “RESUME STOP.”

2 Press 3/SELECT.

The TV screen shows “RESUME PLAY” and the player resumes playback from the position where playback was interrupted.

To play back from the beginning

After inserting the disc, press 7 before pressing 3/SELECT to start playback.

To advance or reverse playback rapidly while monitoring

During playback, press ¡ or 1 on the remote control unit.

You can select from 2 times (1.5 times for only the forward playback of DVD VIDEO), 5 times, 20 times and 60 times (for DVD VIDEO only) normal speed. Pressing 3/SELECT returns the player to normal playback.

During playback, hold down ¢ or 4.

Playback is advanced or reversed at 5 times normal speed.

NOTE

During rapid playback, the sound will be muted except when playing an audio CD, and when playing a DVD VIDEO at 1.5 times normal speed. For Audio CD, the sound will be heard intermittently.

operations

When playing back a memory card

Pressing the DVD/CARD with a disc loaded clears the memory of the interrupted position.

To playback a memory card without clearing the memory of the interrupted position, do the following procedure.

1Set the [RESUME] setting to [DISC RESUME].

2Press 7.

3Press 0 to eject the disc.

4Press DVD/CARD and start the memory card playback.

NOTES

If you change the [RESUME] setting from [DISC RESUME] to [OFF] or [ON], you cannot resume playback of a disc whose “resuming” position is stored. However, when you again set [RESUME] to [DISC RESUME], you will then be able to resume playback of the disc.

When you resume playback, set the [RESUME] setting to [DISC RESUME] before removing a loaded disc.

If you interrupt the playback of a disc for which an interrupted position has already been stored, the memory will be updated with the new interrupted position.

For a double-sided DVD VIDEO disc, the player regards each side as a different disc. Therefore, to resume playback of such a disc, the disc must be inserted with the same side down.

When the player memorizes an interrupted point for a disc, it also memorizes Audio, Subtitle and Angle settings.

x1.5 Quick Playback with sound

When you select 1.5 times normal speed playback, the disc is played back with sound.

The subtitle does not go off.

The sound may be heard intermittently.

If the sound of a DVD VIDEO disc is recorded in Dolby Digital or DTS format, stereo linear PCM signals are output. With some DVD VIDEO discs, the sound quality and volume may alter, or the sound may be out of tune.

To switch from rapid reverse playback to x1.5 Quick Playback, first press 3/SELECT, then press ¡ once.

To advance a still picture frame by frame

While paused, press 8.

Each time you press 8, the still picture advances to the next frame.

Pressing 3/SELECT returns to normal playback.

Basic

To play back in slow motion

You can select from 1/32 times, 1/16 times, 1/4 times and 1/2 times normal speed.

During playback, press 8, then press ¡ (to play forward slow motion), or 1 (to play reverse slow motion, for DVD VIDEO disc only).

Pressing 3/SELECT returns to normal playback.

NOTE

During slow motion playback, the sound will be muted.

13

Page 17
Image 17
JVC XV-NP10S manual To advance or reverse playback rapidly while monitoring, X1.5 Quick Playback with sound