Sound settings
Setting the volume
Set the required volume level by pressing the buttons on the remote control of the receiver. A bar indicator is displayed on the screen to show the set volume.
Stereo and two-channel sound reproduction
The channel identifier, which is displayed by pressing the button, shows the set sound reproduction. (Depending on the direction of the sound wave symbols
Press the button to call up the audio menu for sound and language selection. You can now make the required settings, e.g. language selection, provided the corresponding data is contained in the reception signal (sound track), Dolby Digital (5.1 CH). Select the
menu points by pressing the buttons and select the
required setting with the buttons. Press the button once again to exit the menu.
If captions are transmitted, you can select the bar caption language with the buttons and confirm by pressing .
AC3
The receiver can process sound transmissions in AC3 format (Dolby Digital) providing you with the opportunity of listening to cinema sound quality in your living room. The digital sound output is provided for this purpose. You will need to connect it to a corresponding system.
Please refer to the instruction manual of your Dolby Digital system.
30
