Setting system parameters
With or , return to the submenu system parameters.
Local time/Timer
The receiver displays the UTC time transmitted with the data stream (United Time Coordinate, former Greenwich Mean Time). Therefore, in Germany, the time must be corrected by +1 hour.
A correction of the summer time is possibly required in order for the timers to turn on and off at correct times.
You can make this correction yourself using the numerical buttons.
Move the cursor bar with the button to the entry ‘Local time/Timer.’ The first digit in the time entry is shadowed. You can now correct date and time with the numerical buttons. After each entry, the
cursor jumps to the next position. Press the two times to end the entry. The receiver saves the new setting.
Afterwards, do not switch off the receiver with the mains switch but rather with the remote control, otherwise the settings will be lost.
TV type
Use the buttons to specify whether your TV set is a
PAL,
NTSC unit
Confirm by pressing two times.
Picture format
Use the buttons to select the type of picture format, either
4 : 3 format or
16 :9 format.
Auto
Confirm by pressing two times.
Screen
Use thebuttons to select the type of screen display:
conventional (P/S) = standard representation for 4:3 units or
wide screen picture (letter box display off) - in this settings, the wide screen is required for the 16:9 unit.
Confirm by pressing two times.
53
