Kathrein UFD 515 manual Selecting a radio programme by number entry

Programme selection

￿￿button. The radio programme list is now displayed. The upper right-hand column provides information relating to the received satellites, its transmission frequency, the polarisation, the symbol rate, the bouquet and the scrambling. The programme position, the programme name, and type of reception signal (free-to-air/scrambled) are provided on the left. In the upper right-hand field you find the

menu for the menu/ channel setting. Use the ￿￿ buttons to

switch to the next programme, and with ￿￿ buttons to skip to the neighbouring page. The programme selection is confirmed by

pressing ￿.

You can also select the desired programme with the numerical buttons.

Press the ￿ button to exit the programme list and remain in the already set programme.

Selecting a radio programme by number entry

	You can select a different radio programme during a running radio
	programme by entering the programme location number. Use the
	number buttons ￿￿to ￿￿for the purpose of entering the
	programme location number.
Example	You wish to select the radio programme "DLR-Berlin". This
	programme is stored under the programme location number 15. (The
	order of radio programmes is defined in the programme memory, and
	therefore this only serves as an example.)
	To select this programme, press the numbers ￿￿and ￿￿one
	after the other. The receiver waits for about 3 seconds for entry of the
	next number.
	Follow the same procedure for all other programmes – i.e. also
	programmes with three-digit programme location numbers. You do not
	have to enter leading zeros, unless for accessing teletext.

24