Kenmore 318205869A Setting Oven Controls, Setting the Warm & Hold Feature, To set Warm & Hold

Models: 318205869A

1 56
Download 56 pages 48.39 Kb
Page 18
Image 18
Setting the Warm & Hold™ Feature

Setting Oven Controls

Setting the Warm & Hold™ Feature

The To set Warm & Hold:To set Warm & Hold to turn ON automatically:To Operate the Oven LightManual background pad turns ON the Serve Warm & Hold feature and will maintain an oven temperature of 170° F (77°C). The Warm & Hold feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the Warm & Hold feature will shut the oven OFF automatically. The Warm & Hold feature may be used without any other cooking operations or can be used after cooking has finished using TIMED BAKE or DELAY START BAKE.

To set Warm & Hold:

1.Arrange interior oven racks and place baked food in oven. If the food is already in the oven go to step 2.

2.Press Manual backgroundManual backgroundManual backgroundManual background. " " will appear in the display and the Warm & Hold indicator light above the pad will turn ON. Note: If no further pads are touched within 6 seconds the request to turn ON Warm & Hold will be cleared.

3.Press Manual background or Manual background to start.

4.To turn Warm & Hold OFF at any time press Manual backgroundManual backgroundManual backgroundManual background. The Warm & Hold indicator light above the pad will turn OFF.

To set Warm & Hold to turn ON automatically:

1.Arrange interior oven racks and place food in oven. Set the oven properly for Timed Bake or Delay Start Bake.

2.Press Manual backgroundManual backgroundManual backgroundManual background. The Warm & Hold indicator light above the pad will turn ON.

3.Warm & Hold is set to turn ON automatically after Timed Bake or Delayed Start Bake has finished.

4.To turn Warm & Hold OFF at any time press Manual backgroundManual backgroundManual backgroundManual background. The Warm & Hold indicator light above the pad will turn OFF.

To Operate the Oven Light

The interior oven light will automatically turn ON when the oven door is opened. Press Manual background to turn the interior oven light ON and OFF whenever the oven door is closed.

The interior oven light is located at the upper right rear wall of the oven interior and is covered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use. To change the interior oven light, see “Changing the Oven Light” in the General Care & Cleaning section in the Use & Care Manual supplied with the appliance.

18

Page 18
Image 18
Kenmore 318205869A Setting Oven Controls, Setting the Warm & Hold Feature, To Operate the Oven Light, To set Warm & Hold