Your dryer sounds a signal when a drying cycle is finished. The signal is helpful when you are drying
permanent press, synthetics, and other items. These items should be
removed from the dryer as soon as it stops in order to prevent wrinkles.
•The 'volumeof the signal can be adjusted.
SIGNAL
END OF CYCLE
PUSH TO START BUTTON
Use this control to start the dryer. Be sure the dryer door is closed.
Opening the door stops the dryer. It will not start again until you close the door and press the PUSH TO START Button. Be sure the Cycle Selector Control (Timer) is still on a drying cycle or air setting.
PUSH TO START
overdrying.This helps your fabrics retain the natural moisture they need, prevents static, and reduces pilling - the formation of small
on the surface of garments. Pilling is the natural result of wearing and washing of garments.
Kenmore dryers help prevent overdrying so you get outstanding fabric care. In the AUTO DRY and TIMED DRY Cycles, clothes are dried at the temperature
you selected until the last few minutes
of the cycle. The dryer then switches to low heat.
COOL DOWN
Approximately ten minutes before the end of the AUTO DRY and TIMED DRY Cycles, clothes are tumbled without heat to help reduce wrinkles and make clothes more comfortable to handle.
29
