A. SELECT LOCATION FOR YOUR DRYER

Selecting the proper location

for your dryer makes installation easier and gives you the best drying performance.

STANDARD INSTALLATION

Check location where dryer will be installed. Proper installation is your responsibility. Make sure you have everything necessary for correct installation including proper floor support, a level floor, and a separate 30-amp. fuse.

*Protect dryer from the weather. Proper operation of dryer cycles requires temperatures above 45°F. At lower temperatures, the dryer may not shut cff at the end of automatic cycles. Drying times will be extended.

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from dryer.

Place dryer at least 18 inches above the floor for a garage installation.

Failure to follow these instructions

can result in death, explosion, or fire.

Check code requirements. Some codes limit or do not permit installation of clothes dryers in garages, closets, mobile homes, or sleeping quarters. Contact your local building inspector.

Separate

30-amp. fuse.

Grounded receptacle:

Within 2 feet of either

side of dryer.

Support:

Floor

must be

Level

floor: Maximum

allowable slope under entire

sturdy enough to support

dryer-

1 inch.

a total weight of 175

 

 

pounds

(includes

dryer

 

 

and load

weight).

 

 

 

y

Page 8
Image 8
Kenmore 3405602 owner manual Select Location for Your Dryer, Standard Installation